What precautions should be taken when welding S890Q?
When welding S890Q high-strength steel, key precautions include thorough surface cleaning to remove moisture/impurities (preventing hydrogen cracking), proper preheating to control cooling rates, using low hydrogen consumables, controlling heat input, and selecting appropriate filler metals to match the base material's strength, alongside standard PPE and ventilation for safety from fumes, sparks, and electric shock.

S890Q is a fluid-tempered high strength weldable fine grained steel with a min. yield point of 890 N/mm². It is applicated for high loaded steel constructions, vehicles, lifting, mining equipment. The usual thickness range amounts 3 to 100 mm. The lowest application temperature accounts for -20°C. The steel is processed by cold forming, at temperatures below the highest permissible stress relieving temperature of 530 to 580 °C. After hot forming at 700 to 1050°C has to be coducted a retempering in order to achieve delivery condition qualities. The steel is combustible and electric arc cuttable subject to appropriate mode of operation. Flame cutting is affected by the surface condition. For product thicknesses above 30 mm is advisable a preheating to 100 to 200 °C in order to assure cold crack resistance. Preheating to 100 to 200 °C is advisable for workpiece temperatures below 5 °C and if the thermal cut edges should be cold formed on processing. Instructions: The steel is suitability tested for the construction of pressure vessels and pressure pipes according to the regulations valid.
Common Applications:
Heavy Lifting: Crane booms, aerial platforms, load handling equipment.
Transportation: Trailers, heavy vehicles.
Mining & Agriculture: Earth-moving equipment, crushers, bulldozer blades.
Infrastructure: Bridges, special containers, sea-links.

What is the hardness of S890Q?
S890Q is a high-strength structural steel with a minimum yield strength of 890 MPa, and while hardness isn't the primary defining feature like yield strength, it's known for good toughness and weldability, typically supplied quenched and tempered (Q) for demanding applications like heavy machinery and bridges. The specific hardness varies with thickness and processing, but it's generally a very hard, strong steel, with its properties falling into specific ranges for tensile strength (Rm) and impact energy (Akv) as per the EN 10025-6 standard.
What precautions should be taken when welding S890Q?
When welding S890Q high-strength steel, key precautions include thorough surface cleaning to remove moisture/impurities (preventing hydrogen cracking), proper preheating to control cooling rates, using low hydrogen consumables, controlling heat input, and selecting appropriate filler metals to match the base material's strength, alongside standard PPE and ventilation for safety from fumes, sparks, and electric shock.
What welding rod for S890Q?
For welding S890Q, a high-strength, fine-grained steel, you need a low-alloy filler metal matching its strength and toughness, such as a ER 120S-1 TIG rod (AWS A5.28) or a comparable E11018-M (SMAW) electrode, often with nickel and molybdenum for enhanced properties, designed for quenched and tempered steels to ensure good impact strength at low temperatures. Always consult the base material's datasheet and relevant codes (like ISO 15608) for specific preheat, interpass, and post-weld heat treatment (PWHT) requirements.
|
Steel Grade : |
EN10025-6 S890Q |
|
Specification (mm) |
THK: 3 to 300, Width: 1500 to 4050, Length: 3000 to 27000 |
|
Standard: |
Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
|
Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
|
Classification: |
Hot rolled products of structural steels |
|
S890QChemical Composition |
||||||||
|
Grade |
The Element Max (%) |
|||||||
|
C |
Si |
Mn |
P |
S |
N |
B |
Cr |
|
|
S890 Q |
0.20 |
0.80 |
1.70 |
0.020-0.025 |
0.010-0.015 |
0.015 |
0.005 |
1.50 |
|
Cu |
Mo |
Nb |
Ni |
Ti |
V |
Zr |
|
|
|
0.50 |
0.70 |
0.06 |
2.0 |
0.05 |
0.12 |
0.15 |
|
|
|
Grade |
S890Q Mechanical Property |
|||
|
Thickness |
Yield |
Tensile |
Elongation |
|
|
S890 Q |
mm |
Min Mpa |
Mpa |
Min % |
|
3 |
890 |
940-1100 |
11 |
|
|
50 |
830 |
880-1100 |
11 |
|
|
100 |
800 |
820-1000 |
11 |
|
1What is the best way to cut S890Q?
The best way to cut S890Q high-strength steel depends on the thickness of the plate and the required edge quality, but Laser Cutting and Waterjet Cutting are generally considered superior for maintaining the material's integrity.
2What are the typical application fields of S890Q?
S890Q is a high-strength, fine-grained structural steel used in applications requiring extreme load-bearing capacity, such as heavy construction equipment (mining, cranes), offshore structures (drilling rigs, wind turbine supports), bridge construction, and transportation machinery, due to its excellent strength, toughness, and weldability after quenching and tempering.
3What is the composition of S890Q?
S890Q is a high-strength, fine-grained structural steel (EN 10025-6) quenched and tempered for high-load applications, primarily defined by its minimum yield strength of 890 MPa, with its chemical composition featuring controlled levels of Carbon (max 0.20%), Silicon (max 0.80%), Manganese (max 1.70%), Chromium, Molybdenum, and Nickel, alongside Phosphorus (max 0.025%) and Sulfur (max 0.015%), plus microalloying elements like Niobium (Nb) and Vanadium (V) for strength, with slight variations possible between suppliers but maintaining these key elements within limits for weldability and strength.
4What is the yield strength of S890Q ?
S890Q is a fluid-tempered high strength weldable fine grained steel with a min. yield point of 890 N/mm². It is applicated for high loaded steel constructions, vehicles, lifting, mining equipment.
5What is S890Q material?
S890Q is a European standard (EN 10025-6) high-strength, fine-grain structural steel, known for its exceptional strength (minimum yield strength of 890 MPa) and toughness, achieved through quenching and tempering (the 'Q'), making it ideal for heavily loaded structures like cranes, bridges, and mining equipment where performance under extreme stress is critical.
6What is S890Q equivalent to?
S890Q is a European (EN 10025-6) high-yield strength structural steel, known for its strength (890 MPa minimum yield) and toughness after quenching & tempering (Q), with close equivalents often considered ASTM A514M or Chinese Q890, used in heavy machinery, cranes, and bridges. While direct one-to-one ASTM/JIS matches are tricky, A514 offers similar properties, and Chinese Q890 is a direct parallel in strength.
7What is S890Q standard?
S890Q is a European standard (EN 10025-6) for a high-strength, fine-grained structural steel that is quenched and tempered (Q) for exceptional strength, with a minimum yield strength of 890 MPa, used in heavy-duty applications like mining equipment, cranes, and offshore structures. It's known for good weldability, toughness, and comes in various grades (like S890QL for lower temperature impact) for demanding, high-load constructions.
If you have project requirements for S890Q, we welcome your inquiry. GNEE maintains a large inventory of commonly used high strength steel grades for your selection.For detailed mechanical properties, chemical composition, and technical data, as well as free samples, please contact our factory immediately. We offer competitive prices, stable quality, and professional service. Email:info@gneesteels.com





