Jan 23, 2026 Leave a message

What thickness ranges are available for P690Q?

What thickness ranges are available for P690Q?

P690Q steel plate thickness ranges typically start from around 4 mm (0.157") and go up to 100 mm or more (3.9" - 400 mm), with suppliers like SSAB offering plates up to 100mm, and specialized producers like TJC Steel providing up to 400mm for this quenched and tempered (Q) grade under EN 10028-6. Thicker ranges, like 100-150mm, are available but may have slightly different mechanical properties (e.g., lower yield strength) compared to thinner sections.

P690Q

 

P690Q is a robust, heat-treated steel plate used by industries requiring long-term durability under extreme pressure. Its primary role is to ensure the safe containment of volatile fluids and gases. By combining high strength with high-purity chemistry, it offers a reliable solution for infrastructure that must operate for decades without degradation.

 

Key Characteristics:

It is available in thicknesses from 6 mm to 150mm. The plate maintains its mechanical properties even after Post-Weld Heat Treatment (PWHT) at temperatures up to 580°C, provided the heating cycle is strictly controlled to avoid over-tempering the martensitic structure.

 

Decoding the Name: 

 P: Steels for pressure purposes.

690: Minimum yield strength (690MPa).

Q: Quenched and tempered delivery condition.

Comparison: Compared to standard S355 carbon steels, P690Q allows for a weight reduction of nearly 55%. In a large-scale project, this can translate to thousands of tons in material savings and a massive reduction in the carbon footprint during logistics.

info-760-375

Application:

Fabrication of high-pressure storage tanks for liquefied petroleum gas (LPG).

Construction of spherical gas holders for industrial storage.

Development of heavy-duty chemical reactors.

 

What inspection tests are required for P690Q?
Typical inspections include chemical analysis, tensile testing, impact testing, and ultrasonic testing. For pressure applications, additional non-destructive testing and certification may be required. EN 10025-6 defines mandatory testing to ensure compliance and safety.

How does P690Q perform at low temperatures?
P690Q performs very well at low temperatures due to its quenched and tempered microstructure. It maintains good impact toughness and resists brittle fracture, making it suitable for cold-region applications such as offshore platforms and northern infrastructure projects.

How does thickness affect P690Q properties?
As thickness increases, minimum guaranteed yield and impact properties may decrease slightly. Thicker plates also require stricter welding controls and higher preheating temperatures. Designers must consider thickness-related property variations specified in EN 10025-6.

 

P690Q Chemical Composition and Mechanical Property

P690Q Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

P690Q

0.20

0.80

1.70

0.025

0.015

0.015

0.005

Mo

Cu

Nb

Ni

Ti

V

Cr

0.70

0.3

0.06

2.50

0.05

0.12

1.50

 

Grade

P690Q Mechanical Property

Thickness

Yield

Tensile

Elongation

P690Q

mm

Min Mpa

Mpa

Min %

6-50

690

770-940

14%

50-100

670

770-940

14%

100-150

630

720-900

14%

 

1. What is P690Q steel?
P690Q is a high-strength structural steel defined in EN 10025-6. The "P" indicates pressure purposes, "690" refers to the minimum yield strength in MPa, and "Q" means quenched and tempered. It is designed for heavy-duty applications requiring high strength, toughness, and good weldability under demanding service conditions.

 

2. What standard governs P690Q steel?
P690Q is specified under the European standard EN 10025-6, which covers high-yield-strength structural steels in the quenched and tempered condition. This standard defines mechanical properties, chemical composition limits, delivery conditions, and testing requirements to ensure consistent quality and performance.

 

3. What is the maximum carbon equivalent (CEV) of P690Q?
The maximum carbon equivalent value (CEV) for P690Q is usually limited to around 0.65, depending on thickness. A controlled CEV helps ensure acceptable weldability while maintaining high strength. Lower CEV values reduce the risk of cold cracking during welding.

 

4. What thickness range is available for P690Q?
P690Q plates are commonly available in thicknesses ranging from a few millimeters up to about 150 mm, depending on the steel producer. Mechanical property requirements vary slightly with thickness, and buyers should confirm availability and compliance for specific thickness ranges.

 

5. Can P690Q be cold formed?
Cold forming of P690Q is possible but limited due to its high strength. Larger bending radii are required compared to lower-strength steels. Excessive cold deformation may lead to cracking or loss of toughness, so forming operations should follow manufacturer recommendations and relevant standards.

 

6. Can P690Q be flame cut or plasma cut?
Yes, P690Q can be flame cut or plasma cut, but proper procedures must be followed. Preheating and controlled cooling are recommended for thicker plates to avoid edge cracking. Cut edges may require grinding before welding to ensure sound joints.

 

7.What is the typical tensile strength of P690Q?
The typical tensile strength of P690Q ranges from about 770 to 940 MPa, depending on thickness. This high tensile strength complements its high yield strength, providing excellent resistance to both static and dynamic loads.

 

Contact now

If you have project requirements for P690Q, we welcome your inquiry. GNEE maintains a large inventory of commonly used high strength steel grades for your selection.For detailed mechanical properties, chemical composition, and technical data, as well as free samples, please contact our factory immediately. We offer competitive prices, stable quality, and professional service. Email: info@gneesteels.com

info-514-725

 

 

 

 

 

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry