Recently, many customers have been inquiring about the price of Q960E steel plates in Hangzhou. As a high-strength structural steel, it is widely applied in construction machinery, bridge construction and other sectors. Today we will discuss the market price of this steel grade and its influencing factors, helping you gain a clearer understanding of the current market situation.
What Is the Average Price of Q960E Steel Plate Per Ton?
According to 2026 East China market data, the average FOB China price of Q960E quenched and tempered (QT) high strength steel plate from mainstream Chinese mills ranges from 830 to 900 USD per ton for conventional medium-thick specifications (20–50mm).
Prices vary significantly by thickness, technical requirements and order volume. The table below shows reference price ranges by thickness band:
Data compiled from public market quotations, for reference only. Final price subject to official quotation.
The table below shows indicative price bands. However, actual offers depend on thickness, quantity, and processing requirements. Contact our team for a live quote – we respond within 4 hours with firm pricing and delivery lead time.
Q960E Steel Plate Price (FOB China)
| Thickness Range | Price Range (USD/ton) | Market Notes |
|---|---|---|
| 6 – 16 mm | 900 – 1050 | High difficulty thin gauge QT process, strict flatness control |
| 20 – 50 mm | 850 – 980 | Main production range, most stable supply |
| 50 – 100 mm | 900 – 1050 | Longer heat treatment cycle, higher energy cost |
| Above 100 mm | 1000 – 1200+ | Custom heavy plate, low production efficiency |
Main Factors Affecting Prices
- Raw Material Costs ：Steel is the primary raw material for Q960E steel plates, and its price is heavily impacted by price fluctuations of upstream raw materials including iron ore and coal. Recently, domestic iron ore prices have dipped slightly, stabilizing steel production costs to a certain extent.
- Market Supply and Demand ：As a key industrial city in the Yangtze River Delta, Hangzhou boasts robust demand from infrastructure projects and manufacturing industries. Concentrated bulk procurement for local key projects may drive up prices in the short term; on the contrary, prices will remain relatively stable when market supply is abundant.
- Transportation & Processing Charges: Transportation costs for steel plates vary depending on delivery distance and shipping methods. Processing fees (such as cutting, bending and other fabrication services) also contribute to the final overall price. It is recommended that buyers take these additional costs into comprehensive consideration during procurement.
Does Plate Thickness Affect Q960E Cost?
Yes, plate thickness directly affects the production cost and final selling price of Q960E steel.
- Thin gauge (≤16mm): Requires precision quenching and multi-pass leveling to avoid warpage and waviness, which increases process difficulty and production cost, resulting in a slight price premium over medium-thick plates.
- Medium-thick (20–50mm): Falls into the most mature production range with high mill throughput and the lowest per-ton cost.
- Extra-thick (≥80mm): Requires longer heating and holding time during heat treatment to ensure uniform through-thickness properties. Lower production yield and higher energy consumption push costs up significantly. Switching from 50mm to 100mm thick Q960E can increase material cost by 15%–30%.
Q960E Steel Plate Dimensions and Weight Chart
The table below lists the most commonly supplied Q960E plate specifications and their corresponding theoretical weight per square meter:
| Thickness (mm) | Common Width Range (mm) | Common Length Range (mm) | Theoretical Weight (kg/m²) |
|---|---|---|---|
| 6 | 1500 – 2000 | 6000 – 12000 | 47.10 |
| 10 | 2000 – 2400 | 8000 – 13000 | 78.50 |
| 16 | 2000 – 2500 | 8500 – 10000 | 125.60 |
| 20 | 2000 – 2500 | 9600 – 10000 | 157.00 |
| 30 | 1500 – 3000 | 10000 – 18000 | 235.50 |
| 50 | 2000 – 3800 | 12000 – 20000 | 392.50 |
| 80 | 2500 – 4000 | 15000 – 25000 | 628.00 |
All standard sizes can be customized to fixed lengths and widths according to specific project requirements. Custom cutting and further fabrication services are available upon request.
Need a size not listed? We supply custom dimensions and can calculate theoretical weight for any combination. Send us your cutting plan – we'll optimize nesting and quote finished parts, not just raw plates.
How To Calculate The Weight Of Q960E Steel Plate?
The weight of a Q960E steel plate is determined by its thickness, width, length and the standard density of carbon steel (7.85 g/cm³).
- Formula For Metric Units: Weight (kg) = Thickness (mm) × Width (m) × Length (m) × 7.85
Example Calculation
For a Q960E steel plate with:
- Thickness: 20 mm
- Width: 2500 mm (2.5 m)
- Length: 10000 mm (10 m)
- Weight per plate: 20 × 2.5 × 10 × 7.85 = 392.5 kg = 0.3925 tons
Therefore, one 20×2500×10000mm Q960E plate weighs approximately 392.5 kilograms.
Note: These formulas provide theoretical weights based on standard steel density. Actual weights may vary slightly due to manufacturing thickness tolerances specified in GB/T 709.
Is Q960E More Expensive Than Q690E?
Yes, Q960E ultra-high strength steel is typically 25% to 40% more expensive per ton than Q690E high strength steel.
The price premium comes from higher alloy content, stricter heat treatment process control and lower production yield. However, the higher strength of Q960E allows for thinner plate design under the same load requirement, delivering around 25% structural weight reduction. For mobile equipment and weight-sensitive projects, the material cost premium can be offset by savings in transportation, welding, fuel consumption and increased payload capacity.
| Item | Q690E High Strength Steel | Q960E Ultra High Strength Steel |
|---|---|---|
| Minimum Yield Strength | 690 MPa | 960 MPa |
| Delivery Condition | Quenched & Tempered | Quenched & Tempered |
| Low-Temperature Impact Guarantee | -40℃ | -40℃ |
| Price Level | Benchmark | 25% – 40% higher |
| Relative Weight Under Same Load | 100% (benchmark) | ~75% (25% lighter) |
| Recommended Scenarios | General heavy-load structures, conventional machinery | Ultra-lightweight high-load structures, heavy lifting equipment, mining hydraulic supports |
Q960E Steel Plate Supplier – GNEE Steel
GNEE Steel is a professional supplier of high strength and ultra-high strength steel plates, with regular inventory of Q960E plates in thicknesses ranging from 6mm to 70mm sourced from top Chinese mills including Wuyang Iron and Steel, Nanjing Steel and Xiangtan Steel.
Product Specifications
| Item | Details |
|---|---|
| Product Type | Quenched & Tempered High Strength Steel Plate |
| Available Grades | Q960D, Q960E, Q690D, Q690E |
| Thickness Range | 6mm – 150mm |
| Width Range | 1500mm – 4000mm |
| Length Range | 6000mm – 25000mm, customizable |
| Standard Compliance | GB/T 16270; performance equivalent to EN 10025-6 S960QL, ASTM A514 Grade B |
Quality Control & Certification
GNEE ensures 100% traceability for every plate through a comprehensive quality management system. Material Test Certificates (MTC) are issued in accordance with EN 10204 3.1 / 3.2 standards.
Before shipment, all plates go through strict inspection:
- Chemical composition analysis via spectral testing
- Full mechanical property verification (tensile, yield, elongation, impact)
- Optional ultrasonic flaw detection
- Dimensional accuracy and flatness inspection
- Third-party inspection by SGS, BV, TÜV accepted
GNEE Steel Processing Services
To reduce your secondary processing cost and shorten project lead time, we provide full-range customized services:
- Precision cutting (laser, plasma, flame) for custom shapes
- Bevel preparation (V-type, X-type, K-type) for on-site welding
- Surface pretreatment: shot blasting to Sa2.5 grade, optional anti-rust primer coating
- Cold bending and rolling services with process parameter guidance
Export Packaging & Logistics
- Surface protection: Waterproof paper wrapping to prevent rust and scratches during transit
- Edge protection: Steel edge guards to avoid damage during loading and unloading
- Standard export seaworthy packaging, suitable for all modes of transport
- Flexible shipping terms: FOB, CIF, DDP, DAP available from major Chinese ports including Tianjin, Shanghai and Qingdao
Ready to order Q960E – or need a comparable grade recommendation?
Whether you are comparing Q960E vs Q690E, requesting SGS inspection, or need custom cut-to-size plates, GNEE Steel offers competitive mill-direct pricing with full traceability and EN 10204 3.1/3.2 certification.
Send your inquiry today with your required thickness, dimensions, and destination port – we will provide a tailored quotation within 24 hours, along with free technical advice on welding and forming parameters for your application.
