P355GH Pressure Vessel Plate Material
Want to know more about our products? Please contact us by email or phone.
Gnee Steel (Tianjin) Co., Ltd. is one of the most professional p355gh pressure vessel plate material manufacturers and suppliers in China. Welcome to wholesale customized p355gh pressure vessel plate material at competitive price from our factory. Good service and quality products are available.
P355GH Pressure Vessel Plate Material
P355NH pressure vessel steel has good weldability and high resistance to brittle cracking. P355NH is used by manufacturers around the world to make pressure vessel tanks for storing pressurized gases. P355NH is used in petroleum, chemical industry, power stations, boilers and other industries to make reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, liquefied petroleum gas cylinders, equipment and hydropower station high pressure Water pipes, turbine volutes and other components.
P355GH Boiler Plate Steel Chemical Composition
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu | - |
| max 0.18 | max 0.5 | 1.1 - 1.7 | max 0.5 | max 0.025 | max 0.015 | max 0.3 | max 0.08 | max 0.1 | max 0.012 | max 0.05 | max 0.03 | max 0.02 | max 0.3 | Nb+Ti+V < 0.12 |
| Grade | Thickness | Yield | Tensilmie | Elongation | Impact Energy(KV J) min | ||
| P355NH | mm | Min Mpa | Mpa | Min % | -20° | 0° | +20° |
| ≤ 16 | 355 | 490-630 | 22 | 47 | 55 | 63 | |
| 16> to ≤35 | 355 | 490-630 | 22 | 47 | 55 | 63 | |
| 35> to ≤50 | 345 | 490-630 | 22 | 47 | 55 | 63 | |
| 50> to ≤70 | 325 | 490-630 | 22 | 47 | 55 | 63 | |
| 70> to ≤100 | 315 | 470-610 | 21 | 47 | 55 | 63 | |
| 100> to ≤150 | 295 | 450-590 | 21 | 47 | 55 | 63 | |
P355GH Steel Boiler Plate Dimensions
| CUT-TO-LENGTH PLATES | FOUR-HIGH MILL PLATES | ||
|---|---|---|---|
| WIDTH1 from _ to in mm |
THICKNESS1 from _ to in mm |
WIDTH1 from _ to in mm |
THICKNESS1 from _ to in mm |
| - | - | ||
| - | - | 3,600 | 4.0 to 85.0 |
| - | - | 3,600 | 4.0 to 40.02 |
| - | - | ||
| - | - | ||
| 3,600 | 4.0 to 85.0 | ||
| 3,600 | 4.0 to 85.0 | ||
| 3,600 | 4.0 to 85.0 | ||
| - | - | 3,600 | 4.0 to 85.0 |
| - | - | ||
| - | - | 3,300 | 4.0 to 65.0 |
| - | - | ||
| - | - | 3,600 | 4.0 to 85.0 |
| - | - | 3,300 | 4.0 to 85.0 |
| 3,300 | 4.0 to 50.0 | ||
| - | - | 3,300 | 4.0 to 20.02 |
| - | - | ||
P355GH Vs P355NH Pressure Vessel Of Steel Plate
P355GH and P355NH are two grades of boiler of steel plate that can be distinguished based on certain characteristics:
EN 10028-2: Grade 2009 Steel Plate Product Designation P355GH container steel plate with high temperature properties for use in specific pressure applications. P355NH is a fine grain normalized weldable flat bar complying with EN 10028-2: 2009.
Compared with P355NH, the chemical composition of P355GH Hot rolled boiler steel plates is slightly better.
The tensile strength of P355GH grade is slightly higher than P355NH Pressure Vessel (PVQ) Steel Plate.
Boiler Steel Plate Product Iamge



GNEE Group Team Photo

GNEE Group Customer Visit



GNEE Group Steel Exhibitions



We have a professional staff to provide a detailed response to your order. If you have any questions about P355GH pressure vessel plate material, please contact me.
Hot Tags: P355GH Pressure Vessel Plate Material, China P355GH Pressure Vessel Plate Material manufacturers, factory, P295GH Pressure Vessel Steel Plate, P265GH Pressure Vessel Steel Plate, Quenched And Tempered Steel Plate P355QL1 P355QL2, P460QL1 P460QL2 Steel Plate For Low Temperature Tank, P355NL1 P355NL2 Steel Plate P460NL1 P460NL2 For Tanks, EN Pressure Vessel Plate
You Might Also Like
Send Inquiry













