500kva 33 0.415 Kv Distribution Transformer
video

500kva 33 0.415 Kv Distribution Transformer

To supply a outstanding 500kva 33 0.415 kv distribution transformer, GNEE executes management procedure as ISO9001 standard system, moreover, each 500kva 33 0.415 kv distribution transformer produced fit the IEC60076 or the above. To cut the material costs, GNEE also has created advanced solution for clients since 2006. Partners from various domains are encouraged to visit our company and explore partnership opportunities.
Send Inquiry
Chat Now

Want to know more about our products? Please contact us by email or phone.

Send E-mail: info@gneesteels.com
Product Introduction

Gnee Steel (Tianjin) Co., Ltd. is one of the most professional 500kva 33 0.415 kv distribution transformer manufacturers and suppliers in China. Welcome to wholesale customized 500kva 33 0.415 kv distribution transformer at competitive price from our factory. Good service and quality products are available.

 

GNEE Steel power distribution transformer

Basically, a distribution transformer is also known as a common kind of isolation transformer, and its main function is to alter the high voltage of the transformer from normal voltages like 240/120 volts to use in electric power distributions.

 

When it comes to the distribution system, there are several types of transformers out there. Including but not limited to single-phase transformers, three-phase transformers, pad-mounted transformers, pole-mounted transformers, and many more.

 

In general, these types of transformers are usually available in various sizes with different levels of efficiencies, and there is a difference in their insulating oil as well. The selection of these transformers relies on the equipment and also your budget.

distribution transformer manufacturers

distribution and power transformer

The 500kva 33 0.415 Kv Distribution Transformer Technical Data

Rated Capacity:

500 kVA

Mode:

S11-M-500 or according to requirements

Primary Voltage:

33kV

Secondary Voltage:

415V

No Loading Loss:

680±10% W

Loading Loss:

6516±10% W

Impedance:

6.5%±10%

Tapping Method:

online tapping or offline tapping

Cooling method:

ONAN

Altitude:

less than 1000m above the sea level

The 500kva 33 0.415 Kv Single Phase Distribution Transformer Annual Maintenance Procedures

For the annual inspection, component maintenance and cleaning are the key focus:

1.Use soft cotton to clean the 500kva 33 0.415 kv distribution transformer bushings.

2.Annual inspection of OLTC (On-Load Tap Changer) is crucial. Ensure moisture levels and dielectric properties are at the appropriate levels for efficient operation. (Observe oil condition and sample moisture content (PPM) and dielectric strength (BDV). Low BDV and high PPM levels indicate the need for oil replacement.)

3.Tighten all connections of control and relay circuits at least once a year. Additionally, check if the indicator heaters are at standard spacing and performing as required. Clean the marshalling box at least once a year. (The marshalling box should be cleaned. Indicator heaters should also be checked in conjunction with the space functions.)

4.Clean control switches, alarm devices, and relays along with their circuits using the specified cleaning agents.

5.Check the operation of your news release equipment.

6.Check the oil levels on indicators and ensure they contain the required oil volume for operation.

7.Measure the resistance rating of ground connections and risers. Do this by measuring ground resistance with a ground resistance tester.

single phase distribution transformer

dry type distribution transformer

Hot Tags: 500kva 33 0.415 kv distribution transformer, China 500kva 33 0.415 kv distribution transformer manufacturers, factory, 500 KVA Distribution Transformer, 20000 KVA Distribution Transformer

Send Inquiry

whatsapp

phone

Email

Inquiry