ASME SA387 Grade 22 Class 1 Steel Plates
ASME SA387 Grade 22 Class 1 is a high-quality chromium-molybdenum alloy steel specifically engineered for use in weldable pressure vessels and industrial boilers. As a "Class 1" material, it is characterized by its specific heat treatment, resulting in lower tensile and yield strength requirements compared to Class 2, which often translates to enhanced ductility and toughness.

ASME SA387 Grade 22 Class 1 is a chromium-molybdenum alloy steel plate for high-temperature pressure vessels, offering excellent corrosion/oxidation resistance due to its Cr-Mo content, with Class 1 indicating specific mechanical properties like a tensile strength of 415-585 MPa and minimum yield strength around 205 MPa, differing from Class 2's higher strength, and used extensively in oil & gas, power, and petrochemical industries.
Key Characteristics
Material Type: Chromium-Molybdenum (Cr-Mo) Alloy Steel Plate.
Application: Elevated temperature service in boilers, pressure vessels, refineries, and petrochemical facilities.
Composition: Contains ~2.25% Chromium and ~1% Molybdenum, which provide high-temperature strength and corrosion resistance.
Class 1 vs. Class 2: Class 1 has lower tensile and yield strength but better ductility (formability/weldability) compared to Class 2, which is stronger but less ductile.
Benefits
Heat Resistance: Performs well in high-temperature applications (up to ~600°C/1100°F).
Corrosion Resistance: Excellent resistance to oxidation and general corrosion.
Cost-Effective: Long-term benefits in reduced maintenance for demanding applications.
In essence, SA387 Gr 22 Cl 1 provides strength and durability for critical high-temperature industrial equipment where toughness and formability are as important as strength.

Equivalents for ASME SA387 Grade 22 Alloy Steel Plates
| BS | EN | ASTM/ASME | DIN |
| 622-515B | 10 CRMO910 | SA387-22-1 | 10 CRMO910 |
Specifications for ASME SA387 Grade 22 Alloy Steel Plates
| Designation | Nominal Chromium Content (%) |
Nominal Molybdenum Content (%) |
| SA387 Grade 22 | 2.25% | 1.00% |
Tensile Requirements for ASME SA387 Grade 22 Alloy Steel Plates Class 1 Plates
| Designation: | Requirement: | Grade 22 |
| SA387 Grade 22 | Tensile strength, ksi [MPA] | 75 to 100 [515 to 690] |
| Yield strength, min, ksi [MPa]/(0.2% offset) | 45 [310] | |
| Elongation in 8 in. [200mm], min % | ... | |
| Elongation in 2 in. [50mm], min, % | 18 | |
| Reduction of area, min % | 45 (measured on round specimen) 40 (measured on flat specimen) |
Chemical Requirements for ASME SA387 Grade 22 Alloy Steel Plates
| Element | Chemical Composition (%) | |
| SA387 Grade 22 | ||
| Carbon: | Heat Analysis: | 0.05 - 0.15 |
| Product Analysis: | 0.04 - 0.15 | |
| Manganese: | Heat Analysis: | 0.30 - 0.60 |
| Product Analysis: | 0.25 - 0.66 | |
| Phosphorus: | Heat Analysis: | 0.035 |
| Product Analysis: | 0.035 | |
| Sulphur (max): | Heat Analysis: | 0.035 |
| Product Analysis: | 0.035 | |
| Silicon: | Heat Analysis: | 0.50 max |
| Product Analysis: | 0.50 max | |
| Chromium: | Heat Analysis: | 2.00 - 2.50 |
| Product Analysis: | 1.88 - 2.62 | |
| Molybdenum: | Heat Analysis: | 0.90 - 1.10 |
| Product Analysis: | 0.85 - 1.15 |
1What is ASME SA 387 GR 22 material?
SA 387 Grade 22 Steel Plate
The SA 387 Grade 22 Steel is a pressure vessel steel made up of high-quality raw material and high technology. Commonly used for high-temperature tasks based on its high heat tolerance this steel plate can be exposed up to 600° while maintaining superb oxidation and corrosion resistance.
2What is ASME SA387 Grade 22 Class 1 equivalent to ?
ASME SA387 Grade 22 Class 1 is equivalent to ASTM A387 Grade 22 Class 1, with common international equivalents being EN 10 CRMO9-10, 10CrMo9-10, and BS 622-515B, representing a chromium-molybdenum alloy steel plate for elevated temperature pressure vessels, sharing similar chemical and mechanical properties like ~2.25% Cr / 1% Mo content and specific tensile strength ranges.
3What are the typical application fields of ASME SA387 Grade 22 Class 1 ?
ASME SA387 Grade 22 Class 1 alloy steel is primarily used in high-temperature, high-pressure applications, especially in the oil & gas, petrochemical, and power generation industries, for fabricating pressure vessels, boilers, heat exchangers, piping, and reactors that need excellent corrosion and oxidation resistance at elevated temperatures. Its good weldability and formability make it ideal for demanding environments where strength and durability under heat are critical.
4What temperature is ASME SA387 Grade 22 Class 1?
ASME SA387 Grade 22 Class 1 is a chromium-molybdenum alloy steel designed for elevated temperature service in boilers and pressure vessels, specifically the Class 1 material requires a minimum tempering temperature of 1250°F (675°C), allowing it to resist sigma-phase embrittlement and maintain strength in high-heat applications, especially in petrochemical environments.
5What is the difference between ASME SA387 Grade 22 Class 1 and ASME SA387 Grade 22 Class 2?
The main difference between ASME SA387 Grade 22 Class 1 and Class 2 lies in their mechanical strength, with Class 2 having significantly higher tensile and yield strength than Class 1, while both share the same base chromium-molybdenum alloy composition (2.25% Cr, 1% Mo) for high-temperature service in boilers and pressure vessels. Class 2 is stronger for more demanding elevated temperature applications, whereas Class 1 offers lower strength but still good performance.
If you have project requirements for ASME SA387 Grade 22 Class 1 we welcome your inquiry. GNEE maintains a large inventory of commonly used high strength steel grades for your selection.For detailed mechanical properties, chemical composition, and technical data, as well as free samples, please contact our factory immediately. We offer competitive prices, stable quality, and professional service. Email:info@gneesteels.com





