Apr 01, 2026 Leave a message

WEAR-RESISTANT-STEEL-PLATE.pdf

Recommendations for selecting gas cylinder steel strength grades: HP265, HP295, and HP345

Products Description

 

HP265, HP295, and HP345 are specialized welded steel plates for gas cylinders manufactured according to GB 6653-2008 standard. They are graded by yield strength, corresponding to low-pressure, medium-pressure, and medium-high-pressure gas cylinder applications, respectively, and are core structural materials for gas storage and transportation equipment.

 

HP265 is an economical low-carbon steel with a yield strength ≥265MPa. It possesses excellent plasticity and formability, and is inexpensive. It is mainly used for low-pressure containers such as household liquefied gas cylinders and low-pressure acetylene cylinders.

 

HP295 is a general-purpose medium-pressure steel with a yield strength ≥295MPa. It offers a balanced strength and toughness, stable welding and processing performance, and is suitable for various small-to-medium volume industrial gas cylinders and conventional fire-fighting gas cylinders. It is a mainstream general-purpose material in the industry.

 

HP345 is a high-strength steel with a yield strength ≥345MPa. Achieving high strength and toughness through micro-alloying and controlled rolling processes, it provides ample safety redundancy and enables lightweight cylinders. It is widely used for large-volume, high-pressure, and harsh operating conditions in industrial gas cylinders, liquid ammonia cylinders, and high-pressure fire-fighting gas cylinders.

 

The three materials cover all scenarios from civilian low-pressure to industrial high-pressure, with good molding, excellent welding, and reliable safety, making them a standardized and serialized material selection solution for welding gas cylinder manufacturing.

 

HP265/HP295/HP345 Welding Cylinder Steel: Advantages, Limitations, and Solutions

 

HP265 Welding Cylinder Steel

Advantages: Low-carbon design; excellent plasticity, formability, and weldability; no cracking during cold bending; suitable for complex processes such as deep drawing and rolling; low scrap rate; lowest cost; outstanding cost-effectiveness for mass production; fully compatible with low-pressure gas cylinder standards.

 

Limitations: Relatively low strength (yield strength ≥ 265 MPa); only suitable for low-pressure scenarios ≤ 2.0 MPa; cannot withstand medium- and high-pressure loads; prone to deformation in large-capacity gas cylinders; insufficient safety redundancy.

 

Solutions: Can be used directly in low-pressure, small-capacity scenarios; when increased pressure is required, appropriately increase the cylinder wall thickness, or upgrade directly to HP295 grade, balancing cost and safety.

 

info-752-274

 

HP295 Welding Cylinder Steel

Advantages: Balanced strength and toughness, moderate yield strength ratio (≈0.72-0.75), stable welding performance, and the highest overall cost-effectiveness; wide applicability, covering medium-pressure scenarios of 2.0-3.0MPa, suitable for small-to-medium volume industrial and conventional fire-fighting gas cylinders.

 

Limitations: Limited upper strength limit, unsuitable for high-pressure conditions >3.0MPa; when used in large-volume gas cylinders, increased wall thickness can lead to heavier products and increased transportation costs.

 

Solutions: Can be used directly for general medium-pressure scenarios; for high-pressure and large-volume requirements, switch to HP345 grade; when weight reduction is needed, use controlled rolling and controlled cooling processes to improve toughness, indirectly reducing wall thickness.

 

info-497-221

 

HP345 Welding Cylinder Steel

Advantages: Highest strength (yield strength ≥345MPa), excellent impact and fatigue resistance, sufficient safety redundancy; wall thickness can be reduced to achieve gas cylinder lightweighting, suitable for medium-high pressure, large volume, and harsh conditions >3.0MPa.

 

Limitations: Cold forming is slightly more difficult; the toughness of the weld heat-affected zone is prone to fluctuation; the cost is higher than the previous two methods, and the economics for small to medium batch production are generally limited.

 

Solutions: Improve formability by using low-carbon microalloying and grain refinement processes; combine with low-hydrogen welding processes to stabilize the performance of the weld and heat-affected zone; for mass production, optimize the smelting and rolling processes to reduce overall costs.

 

When to choose welding cylinders HP265, 295 and 345

 

When to Choose HP265
Design Pressure ≤ 3.2MPa

For example, the design pressure of a household YSP-15 liquefied petroleum gas cylinder is typically 2.1-3.2MPa. HP265's minimum yield strength of 265MPa fully meets the wall thickness calculation requirements.

 

Large-volume, Standardized Products

The annual production of household gas cylinders can easily reach millions of units. Using HP265 can achieve the optimal cost per ton of steel, and its excellent cold stamping formability is suitable for high-speed stamping production lines.

 

High Degree of Welding Automation and Strict Process Stability Requirements

HP265 has a low carbon equivalent (≤0.38%), is not sensitive to welding heat input, and is less prone to hardening on automated circumferential welding lines (MAG welding), resulting in a low rework rate.

 

Applications Not Sensitive to Weight

For example, acetylene cylinders. The characteristics of the medium dictate that extreme lightweighting is not required. HP265 offers better cost performance while ensuring safety.

 

HP265 Hot Rolled Steel Pate Coils

HP265 Hot Rolled Steel Pate Coils

 

When to Choose HP295

Design Pressure 3.2-4.5MPa

Large commercial LPG cylinders (YSP118 type, 50kg specification), industrial propane cylinders, etc., are mostly designed for pressures around 4.0MPa, making HP295 the mainstream choice.

 

Need to Balance Strength and Toughness Reserves

Export-type cylinders often need to meet stricter safety factor requirements (e.g., North American standards require a safety factor ≥3.5), and HP295 offers a higher strength margin than HP265.

 

Automated Welding Production but Need to Cope with Minor Fluctuations

HP295's carbon equivalent (≤0.40%) remains within the excellent welding range, while possessing better overall mechanical properties than HP265, making it suitable for handling occasional process fluctuations in automated welding.

 

Some Lightweighting Needs but Not Extreme Requirements

Compared to HP265, using HP295 can reduce wall thickness by approximately 10%, making it suitable for commercial cylinders to reduce steel consumption per cylinder.

 

HP295 HP345 Hot Rolled Steel Pate Coils

HP295 HP345 Hot Rolled Steel Pate Coils

 

When to Choose HP345

Design Pressure 4.5-8.0MPa

High-pressure welded gas cylinders, automotive CNG welded cylinders, special gas storage tanks, etc. HP345 trades strength for weight reduction, achieving a wall thickness reduction of approximately 15% compared to HP295.

 

Weight-Sensitive Applications

  • Mobile gas cylinders (such as vehicle-mounted CNG cylinders), products requiring export shipping charges; the overall cost reduction from weight reduction can cover material price differences.
  • Large welded gas cylinders with a volume ≥150L
  • With large volumes, using HP345 can significantly control the total weight, reducing tonnage costs in lifting and transportation.

 

Export markets have clear requirements for lightweighting.Some countries levy tariffs or freight charges based on empty cylinder weight; HP345 becomes an effective means of weight reduction and cost reduction.

 

Why Choose GNEE as Your Supplier?

 

  • 18+ years manufacturing experience
  • Full certification support (EN, JIS, GB standards)
  • Custom sizes, thickness, and surface treatment
  • Fast delivery and global logistics
  • Strict quality inspection (chemical + mechanical testing)

We don't just sell steel-we provide complete gas cylinder material solutions.

 

 

Contact now to get the votrt

 

 

 

What is the working pressure of an HP345 gas cylinder?

The working pressure varies depending on the medium. The specific pressure is determined by the cylinder's design pressure and the medium it is filled with. Because HP345 cylinders are stronger, they can withstand higher working pressures under the same wall thickness.

 

What is the design service life of an HP345 gas cylinder?

The general design service life is 20 years, but specific details are subject to the "Gas Cylinder Safety Technical Supervision Regulations." Since HP345 cylinders often contain toxic or hazardous substances, the inspection cycle and scrapping standards are more stringent.

 

How are HP345 gas cylinders periodically inspected?

Periodic inspections are required according to the Special Equipment Safety Technical Specifications, including visual inspection, hydrostatic testing, wall thickness measurement, and airtightness testing. Cylinders containing corrosive media typically have shorter inspection cycles.

 

Can HP345 and HP295 gas cylinders be used interchangeably?

No, they cannot be used interchangeably. The design pressure and wall thickness of HP345 cylinders differ from those of HP295. During use, filling must strictly adhere to the original cylinder markings and design requirements; mixing is strictly prohibited.

Send Inquiry

whatsapp

phone

Email

Inquiry