Dec 04, 2025 Leave a message

S355J2 vs S275J2

What is S355J2?

S355J2 is a non-alloy structural steel grade defined in EN 10025-2.

"S" stands for structural steel.

"355" indicates a minimum yield strength of 355 MPa.

"J2" means it has a minimum Charpy impact energy of 27 J at −20°C, ensuring excellent low-temperature toughness.
It is widely used in bridges, buildings, offshore structures, and heavy engineering.


1. Mechanical Properties

Property Value / Requirement Standard / Notes
Yield Strength (ReH) ≥ 355 MPa EN 10025-2
Tensile Strength (Rm) 470–630 MPa EN 10025-2
Elongation (A5) ≥ 20% Typical for structural steel
Impact Energy (Charpy V-notch) ≥ 27 J at −20°C "J2" rating
Density 7.85 g/cm³ Standard steel value
Hardness (HB) ~140–190 HB Brinell hardness

2. Chemical Composition (Typical % by weight)

Element Max / Typical (%)
C 0.22
Si ≤ 0.55
Mn 1.60
P ≤ 0.035
S ≤ 0.035
N ≤ 0.012

info-349-257

What is S275J2?

S275J2 is a non-alloy structural steel grade defined in EN 10025-2.

"S" stands for structural steel.

"275" indicates a minimum yield strength of 275 MPa.

"J2" means it has Charpy V-notch impact energy of ≥27 J at −20°C, giving good low-temperature toughness.

It is commonly used in bridges, building frames, welded structures, and general engineering applications.


1. Mechanical Properties

Property Value / Requirement Standard / Notes
Yield Strength (ReH) ≥ 275 MPa EN 10025-2
Tensile Strength (Rm) 410–560 MPa EN 10025-2
Elongation (A5) ≥ 20% Typical for structural steel
Impact Energy (Charpy V-notch) ≥ 27 J at −20°C "J2" rating
Density 7.85 g/cm³ General steel value
Hardness (HB) 120–180 HB Brinell hardness

2. Chemical Composition (Typical % by weight)

Element C Si Mn P S
% 0.22 ≤0.55 1.60 ≤0.035 ≤0.035

info-356-265

What is the difference of them?

Feature S275J2 S355J2
Yield Strength (ReH) ≥ 275 MPa ≥ 355 MPa
Tensile Strength (Rm) 410–560 MPa 470–630 MPa
Impact Energy (Charpy V) ≥ 27 J at −20°C ≥ 27 J at −20°C
Low-Temperature Use Suitable for cold climates Suitable for cold climates
Weldability Excellent Excellent
Typical Applications Bridges, buildings, general structural steel Heavy engineering, bridges, offshore, high-load structures

Key Differences

Strength: S355J2 has higher yield and tensile strength than S275J2 (355 MPa vs 275 MPa yield).

Applications: S355J2 is preferred for heavier load-bearing structures, offshore platforms, and critical engineering applications, while S275J2 suits moderate structural loads.

Cost: S355J2 is generally more expensive due to its higher strength and performance.

Quote now

 

GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.

info-300-227

Send Inquiry

whatsapp

phone

Email

Inquiry