What is SA709 Grade 50S?
SA709 Grade 50S is a high-strength, low-alloy (HSLA) structural steel plate with a minimum yield strength of 50 ksi (≈345 MPa). It is the standard version of Grade 50 under ASTM A709 and is used in general structural applications such as bridges, highway infrastructure, and heavy civil engineering projects.
Chemical Composition (Typical Maximum Values)
| Element | Content (wt. %) |
|---|---|
| Carbon (C) | ≤ 0.26 |
| Manganese (Mn) | 1.35 max |
| Phosphorus (P) | ≤ 0.035 |
| Sulfur (S) | ≤ 0.035 |
| Silicon (Si) | ≤ 0.40 |
| Other Alloying Elements | Controlled trace amounts depending on mill |
Mechanical Properties
| Property | Minimum Requirement |
|---|---|
| Yield Strength | 50 ksi (≈345 MPa) |
| Tensile Strength | 65–80 ksi (≈450–550 MPa) |
| Elongation | ≥ 18% (varies with thickness) |
| Charpy V-Notch Impact | Meets ASTM A709 low-temperature requirements |
| Weldability | Good; suitable for standard structural welding |
| Formability | Good; suitable for bending, rolling, and fabrication |

What is SA709 Grade 50W?
SA709 Grade 50W is a high-strength, low-alloy (HSLA) structural steel plate with a minimum yield strength of 50 ksi (≈345 MPa). It is specifically formulated for welded applications, providing enhanced weldability and toughness compared with the standard 50S grade. It is used in bridges, highway infrastructure, and heavy structural components requiring extensive welding.
Chemical Composition (Typical Maximum Values)
| Element | Content (wt. %) |
|---|---|
| Carbon (C) | ≤ 0.23 |
| Manganese (Mn) | 1.35 max |
| Phosphorus (P) | ≤ 0.035 |
| Sulfur (S) | ≤ 0.035 |
| Silicon (Si) | ≤ 0.40 |
| Vanadium (V) / Columbium (Nb) | ≤ 0.08 (microalloying) |
| Nitrogen (N) | Controlled trace amounts |
Mechanical Properties
| Property | Minimum Requirement |
|---|---|
| Yield Strength | 50 ksi (≈345 MPa) |
| Tensile Strength | 65–80 ksi (≈450–550 MPa) |
| Elongation | ≥ 18% (depends on thickness) |
| Charpy V-Notch Impact | Meets ASTM A709 low-temperature requirements |
| Weldability | Excellent; optimized for extensive welded structures |
| Formability | Good; suitable for bending, rolling, and fabrication |

What is the difference between them?
The main difference between SA709 Grade 50S and SA709 Grade 50W lies in weldability and chemical composition:
| Feature | SA709 Grade 50S | SA709 Grade 50W | Notes |
|---|---|---|---|
| Yield Strength | 50 ksi (≈345 MPa) | 50 ksi (≈345 MPa) | Both have the same minimum yield strength |
| Tensile Strength | 65–80 ksi (≈450–550 MPa) | 65–80 ksi (≈450–550 MPa) | Similar tensile properties |
| Weldability | Good; suitable for standard welding | Excellent; specifically designed for extensive welded structures | 50W has lower carbon and optimized alloying for welding |
| Toughness | Meets ASTM A709 requirements | Enhanced toughness for welded joints | 50W is better for low-temperature impact and weld-heavy applications |
| Applications | General structural use | Structural members with heavy welding | 50S for standard bridges/structures, 50W for welded bridges, cranes, or heavy load-bearing assemblies |
GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.




