1. What Is SA572 Grade 60?
SA572 Grade 60 is a high-strength low-alloy structural steel defined by ASTM A572/A572M, and supplied under the ASME SA572 designation where the material is used in pressure-boundary or boiler applications. The grade number refers to the minimum yield strength in kilopounds per square inch: Grade 60 guarantees a minimum yield strength of 415 MPa (60 ksi). The steel achieves this strength through micro-alloying with vanadium or niobium, rather than through higher carbon alone, which preserves weldability and toughness. It is used in bridges, building structures, heavy beams, machinery and high-load structural components where Grade 50 does not provide enough strength.
2. Chemical Composition (Typical Limits)
The composition of Grade 60 is controlled to balance strength and weldability. Typical limits are:
| Element | Content (%) |
|---|---|
| C | ≤0.23 |
| Mn | 0.50–1.65 |
| P | ≤0.035 |
| S | ≤0.040 |
| Si | ≤0.40 |
| V and/or Nb | ≤0.15 combined |
| Cu (optional) | ≤0.60 |
The exact limits depend on the product form and thickness and should be verified against the current edition of ASTM A572/A572M and the mill certificate.
3. Mechanical Properties
The key mechanical properties of SA572 Grade 60 are:
| Property | Value |
|---|---|
| Minimum yield strength | 415 MPa (60 ksi) |
| Minimum tensile strength | 520 MPa (75 ksi) |
| Elongation | per ASTM A572, thickness-dependent |
| Density | about 7.85 g/cm3 |
The tensile minimum of 520 MPa distinguishes Grade 60 from Grade 55, whose minimum is 485 MPa. Elongation requirements vary with thickness and gauge length and are taken from the standard.
4. Advantages of SA572 Grade 60
The main advantages follow from the strength-to-weight ratio. First, high strength: the minimum yield of 415 MPa allows lighter structural members while maintaining load capacity. Second, good weldability: the steel can be welded with common processes such as SMAW, GMAW and SAW with proper preheat, which keeps fabrication straightforward. Third, excellent toughness: the micro-alloyed composition maintains impact resistance at low temperatures, reducing the risk of brittle fracture in bridges and heavy structures. Fourth, weight efficiency: less material is needed for the same load, saving cost and simplifying handling and transport. Fifth, durability: the grade resists cracking under stress and fatigue in high-load applications such as bridges, cranes and building columns. Sixth, formability and machinability: it can be cut, machined and formed with standard tools.
5. International Grades with Comparable Strength
Grades with a comparable yield level include S420JR and S420J2 of EN 10025-2 and S420NL of EN 10025-3 in the European system, and Q420D and Q420E of GB/T 1591 in the Chinese system. Grades such as Q460B offer slightly higher strength and are sometimes substituted in heavy-duty structures. Equivalence means similar yield strength and weldability, but chemical composition, toughness and the applicable design codes may differ, so any substitution must be verified against the governing standard and the project specification before it is accepted.
Frequently Asked Questions
What is the yield strength of SA572 Grade 60? The minimum yield strength is 415 MPa (60 ksi), which is the basis of the grade designation in ASTM A572/A572M.
What is the tensile strength of SA572 Grade 60? The minimum tensile strength is 520 MPa (75 ksi); this is higher than the 485 MPa minimum of Grade 55.
Can SA572 Grade 60 be welded? Yes, with common structural welding processes such as SMAW, GMAW and SAW, using proper preheat and a qualified welding procedure specification.
Which international grades are comparable to SA572 Grade 60? S420J2 and S420NL in the EN system and Q420D and Q420E in the GB system are comparable in yield strength; substitution must be verified against the governing standard.
Why choose Grade 60 instead of Grade 50? Grade 60 provides 415 MPa yield instead of 345 MPa, which allows thinner and lighter members for the same load, at the cost of somewhat stricter fabrication control.
Is SA572 Grade 60 suitable for low-temperature service? The grade has good toughness, but the impact test temperature and energy are not automatically defined for every thickness; where low-temperature service is required, the project specification should state the Charpy requirement, and a grade such as S420NL may be more appropriate.




