Dec 03, 2025 Leave a message

What Is SA572 Grade 65 Steel and How Strong Is It?

What Is SA572 Grade 65 Steel?

SA572 Grade 65 is a high-strength, low-alloy (HSLA) structural steel specified under ASTM A572. It is designed for heavy-duty structural applications where higher strength is required than Grade 50 or 55. It offers excellent weldability, toughness, and formability, making it suitable for bridges, building structures, crane components, and other load-bearing structures.


Mechanical Properties

Property Value
Yield Strength (min) 455 MPa (65 ksi)
Tensile Strength 485–655 MPa
Elongation 16–19%
Density 7.85 g/cm³

Chemical Composition (Typical Limits)

Element Content (%)
Carbon (C) ≤ 0.26
Manganese (Mn) 0.50–1.65
Phosphorus (P) ≤ 0.035
Sulfur (S) ≤ 0.040
Silicon (Si) ≤ 0.40
Vanadium/Niobium (V/Nb) ≤ 0.15 (combined)
Copper (Cu, optional) ≤ 0.60

Key Features

High strength for reduced material weight

Good toughness, even at low temperatures

Excellent weldability for structural fabrication

Suitable for heavy-load beams, bridges, and industrial machinery

info-418-312

What are its equivalents?

Materials Equivalent to SA572 Grade 65

U.S. & ASTM / AISC Equivalents

Material Standard Notes
A572 Grade 65 ASTM Same material family, high-strength HSLA steel
A913 Grade 65 ASTM High-strength rolled shapes for structural use
A709 Grade 50W / 50 ASTM Bridge steel; slightly lower yield but sometimes used as a substitute in certain applications

International Equivalents

European Standards

Material Standard Notes
S460JR / S460J2 EN 10025-2 Closest European equivalent (~460 MPa yield)
S460NL EN 10025-3 Enhanced low-temperature toughness

Chinese Standards

Material Standard Notes
Q460C / Q460D GB/T 1591 Yield ~460 MPa, mechanically similar to SA572 Grade 65
Q500B GB/T 1591 Slightly higher strength; sometimes substituted in heavy-duty structures

info-456-343

How Strong Is It?

Mechanical Strength of SA572 Grade 65

SA572 Grade 65 is a high-strength low-alloy (HSLA) steel, designed for demanding structural applications. Compared to lower grades (50, 55, 60), it provides significantly higher yield strength, allowing for lighter structural members without compromising load-bearing capacity.


Strength Properties Table

Property Value
Yield Strength (min) 455 MPa (65 ksi)
Tensile Strength 485–655 MPa
Elongation 16–19%
Density 7.85 g/cm³

Key Takeaways

High yield strength (455 MPa) enables stronger beams, columns, and girders.

Tensile strength up to 655 MPa ensures good load-carrying capacity.

Suitable for bridges, heavy machinery, cranes, and industrial structures.

Offers better strength-to-weight efficiency compared to SA572 Grades 50, 55, and 60.

Quote now

 

GNEE Steel also supplies a variety of high-strength steel plates, such as A514 Grade F, A572 Grade 50, A588 Grade A, S355JR, S690Q, SS400, S690QL, Q345B, Q345E, etc. If you want to know more about other types of steel plates, you can call the consultation hotline at +8615824687445 or send an email to info@gneesteels.com. You are welcome to consult us, and we are very willing to answer your questions.

info-199-211

Send Inquiry

whatsapp

phone

Email

Inquiry