Products Description
HP295 steel is a specialized high-strength low-alloy (HSLA) steel designed specifically for the manufacturing of welded gas cylinders, especially LPG (Liquefied Petroleum Gas) cylinders. It is widely used due to its excellent balance of strength, ductility, weldability, and cost-effectiveness.
For LPG cylinder manufacturers, material selection is critical because cylinders must safely withstand internal pressure, cyclic loading, and harsh environmental conditions. HP295 has become a mainstream choice because it meets these requirements while enabling efficient mass production.
Key Characteristics:
- Designed specifically for pressure containment
- Moderate yield strength suitable for LPG cylinders
- Excellent formability and weldability
- Stable mechanical properties for large-scale production
Product Range and Supply Specifications of HP295 Steel for Cylinder
Standard:GB/T 6653 (Steel Plates & Strips for Welded Gas Cylinders)
Product Forms
Hot-rolled steel coils (most common for cylinder making)
Cut-to-length plates / flat sheets
Dimension Range (typical supply)
| Item | Specification |
|---|---|
| Thickness | 1.5 – 12 mm(Common: 2.0–6.0 mm for LPG cylinders) |
| Width | 800 – 1630 mm |
| Length (plates) | 3,000 – 18,000 mm (customizable) |
| Coil ID / OD | Standard coil dimensions (per mill) |
Chemical Composition of HP295 Steel
The composition of HP295 is optimized to ensure weldability and toughness while maintaining sufficient strength.
| Element | Content (%) |
|---|---|
| Carbon (C) | ≤ 0.20 |
| Silicon (Si) | ≤ 0.55 |
| Manganese (Mn) | 1.20 – 1.60 |
| Phosphorus (P) | ≤ 0.025 |
| Sulfur (S) | ≤ 0.015 |
| Nb/V/Ti | Trace |
- Low carbon content → reduces cracking risk during welding
- Manganese addition → improves strength and toughness
- Microalloying elements → refine grain structure and enhance performance
Mechanical Properties of HP295 Steel
HP295 offers a well-balanced mechanical profile suitable for medium-pressure applications.
| Property | Value |
|---|---|
| Yield Strength | ≥ 295 MPa |
| Tensile Strength | 440 – 560 MPa |
| Elongation | ≥ 24% |
| Impact Energy (20°C) | ≥ 27 J |
- High elongation (≥24%) allows deep drawing and forming
- Moderate strength ensures safety without excessive material thickness
- Good toughness prevents brittle fracture
Performance Comparison: HP295 vs Other Grades
To help manufacturers understand the position of HP295 in the welded gas cylinder steel family, the comparison with adjacent grades is as follows:
| Grade | Yield Strength | Tensile Strength | Elongation | Typical Applications |
|---|---|---|---|---|
| HP235 | 235 | 380–500 | 29 | Low-pressure gas cylinders, products requiring excellent formability |
| HP265 | 265 | 410–520 | 27 | Small and medium-sized gas cylinders |
| HP295 | 295 | 440–560 | 26 | Mainstream choice - household and commercial LPG cylinders |
| HP325 | 325 | 490–600 | 22 | High-pressure gas cylinders, export-oriented products |
| HP345 | 345 | 510–620 | 21 | Large commercial cylinders, products with lightweight requirements |
HP295 strikes an optimal balance between strength and formability. Its strength is sufficient to ensure the safe operation of gas cylinders, while its elongation of 26% guarantees the feasibility of complex deep-drawing processes. In contrast, while the higher-strength HP325 and HP345 grades allow for reduced wall thickness, their formability is somewhat diminished.
Production Process of HP295 Steel
The production of HP295 steel plates employs a modern process flow consisting of "Steelmaking → Continuous Casting → Hot Continuous Rolling":
- Hot Metal Pre-treatment: Desulfurization and dephosphorization treatments
- Converter Smelting: Precise control of chemical composition
- Ladle Refining (LF/VD): Removal of inclusions and harmful gases
- Continuous Casting: Full-process protective casting to prevent secondary oxidation
- Heating: Slabs are heated to temperatures exceeding 1200°C
- Hot Continuous Rolling: Controlled Rolling and Controlled Cooling (TMCP) process
- Coiling/Leveling: Hot-rolled into coils or leveled into steel plates

Production Process of HP295 Steel
Applications of HP295 Steel in LPG Cylinders
HP295 is primarily used in:
Cylinder Body (Shell)
Main pressure-bearing structure
Requires strength and ductility
Cylinder Heads (Top & Bottom)
Formed by deep drawing or spinning
Requires excellent formability
Welded Joints
Longitudinal and circumferential seams
Require high weld integrity

Applications of HP295 Steel in LPG Cylinders
Typical LPG Cylinder Data
| Parameter | Value |
|---|---|
| Working Pressure | 1.6 – 2.5 MPa |
| Test Pressure | 2.4 – 3.75 MPa |
| Material Thickness | 2.5 – 6.0 mm |
Why Choose GNEE as the Manufacturer for HP295 Steel Cylinders?
Reliable Quality Assurance
Strict compliance with GB/T 6653
Full traceability and inspection reports
Third-party certification available
Strong Supply and Customization
Wide range of grades: HP265, HP295, HP345
Custom sizes and specifications
Stable inventory and fast delivery
Global Export Experience
We have supplied gas cylinder steel to clients in Asia, the Middle East, Africa, and South America, supporting both OEM manufacturers and large-scale distributors.

GNEE's factory
How is the weldability of HP295?
HP295 exhibits excellent weldability. This is attributed to its low-carbon composition (C≤0.18%) and low carbon equivalent; consequently, the heat-affected zone (HAZ) is less prone to hardening, and the material is resistant to cold cracking. High-quality welds can be achieved using standard automatic girth-seam welding processes for gas cylinders (such as CO₂ gas-shielded welding or submerged arc welding) without the need for preheating. This is one of the key reasons why HP295 has become a mainstream steel grade for the manufacture of welded gas cylinders.
Can HP295 steel plates be used to manufacture seamless gas cylinders?
No, they cannot. HP295 is specifically designed for welded gas cylinders and is intended for processes involving the welded assembly of cylinder heads and bodies. Seamless gas cylinders (such as high-pressure oxygen cylinders) are manufactured using deep-drawing/piercing or flow-forming processes; their material requirements differ from those of welded cylinders, necessitating the use of other types of steel.
Does HP295 require heat treatment?
Generally no; it is used in the hot-rolled condition.
Is HP295 corrosion-resistant?
It has limited corrosion resistance; coatings are required.
What is the service life of an HP295 cylinder?
Typically 10–15 years under proper maintenance.
Can HP295 reduce cylinder weight?
To some extent, but less than higher-strength steels.




