What Is SN490B Steel?
SN490B is a high-strength steel plate specified in JIS G3136, the Japanese Industrial Standard for rolled steels for building structures. The SN series is intended for the frames of buildings, especially in seismic regions, because the grades combine high strength with controlled toughness and good weldability. In the designation, SN490 indicates a minimum tensile strength of 490 MPa, and the suffix B means the grade carries a guaranteed Charpy V-notch impact requirement at 0 °C.
Chemical Composition
Typical maximum composition limits per JIS G3136 are: carbon 0.20%, silicon 0.55%, manganese 1.60%, phosphorus 0.030%, and sulfur 0.015%, in percent by weight, with thickness-dependent variations. The low phosphorus and sulfur limits support the weldability and toughness that building frame applications require.
Mechanical Properties
For plate up to 16 mm, the minimum yield strength is 325 MPa and the tensile strength range is 490-610 MPa. Minimum yield decreases with increasing thickness, to 315 MPa for 16-40 mm and 295 MPa for 40-100 mm. The minimum Charpy V-notch impact energy is 27 J at 0 °C for the B suffix. These values should be confirmed against JIS G3136 for the ordered thickness and the mill test certificate.
Key Characteristics
SN490B offers high strength, good toughness, and fatigue resistance, together with ease of welding and cold forming. The combination of strength and guaranteed impact toughness makes the grade well suited to structural members that must absorb seismic energy without brittle failure. Note that SN490B is a carbon-manganese building steel; it is not specified for abrasion or acid resistance.
Typical Applications
SN490B is used for beams, columns, and bracing in steel-framed buildings, including office buildings, factories, steel structure projects, high-rise buildings, and landmark buildings. It is also applied in other construction industry structures where reliable welded connections and predictable strength are required.
Frequently Asked Questions
1. What does SN490B mean? SN is the designation for rolled steel for building structures in JIS G3136, 490 is the minimum tensile strength of 490 MPa, and B indicates a guaranteed Charpy impact requirement at 0 °C.
2. What are the mechanical properties of SN490B? Minimum yield 325 MPa for plate up to 16 mm, tensile 490-610 MPa, and Charpy impact energy of 27 J at 0 °C, with yield values decreasing for thicker plate.
3. What is SN490B used for? It is used for beams, columns, and bracing in steel-framed buildings, including high-rise buildings, offices, factories, and landmark structures.
4. Is SN490B weldable? Yes. The controlled composition gives good weldability with conventional processes, which is essential for building frame fabrication.
5. What is the difference between SN490A and SN490B? SN490A has no guaranteed impact requirement, while SN490B guarantees Charpy impact energy at 0 °C, making B the better choice for seismic design and colder conditions.
6. Which standard governs SN490B? JIS G3136 is the governing standard for SN490B; verify the specific requirements against the latest edition and the project specification.




