Jan 13, 2026 Leave a message

What temperature is ASME SA387 Grade 22 Class 2?

What temperature is ASME SA387 Grade 22 Class 2?

ASME SA387 Grade 22 Class 2 is a chromium-molybdenum steel designed for high-temperature service, suitable for working temperatures up to approximately 600°C (1112°F), with its composition (2.25% Cr, 1% Mo) providing excellent resistance to oxidation and corrosion in elevated environments like boilers, pressure vessels, and heat exchangers. It's delivered in a normalized and tempered condition, ensuring good weldability and mechanical strength at high heat.

ASME SA387 Grade 22 Class 2

ASME SA387 Grade 22  is Chrom-Moly steel plate used for making boilers and pressure vessles designed for high temperature high pressure serivce, chrome content at 2.00% to 2.50%, and Moly 0.90% to 1.10% for SA387 GRADE 22 material.

The more content of chromium will provide better corrosion and oxidation resistance, ASTM A387 Grade 22 / ASME SA387 Grade 22 material could be used storage oil, gas, or other liquid for industries, and also compatible with sour services.

 

ASME SA387 GR 22 CL 2 Alloy Steel Plates apply in many industries and general purposes such as food processing, oil & gas, marine, petrochemical, and gas processing industries. Our products are applicable in liners for chutes, tubs, and bins, truck body wear liners, arc plate cyclones, construction & bridges, offshore & onshore services, structural purposes, and shipbuilding. They can also be useful as pressure vessels, flanges, heat exchangers, valves, pipe clamps, and high-temperature ducting. Alloy 387 serves the fabricators, paper, and pulp industries also.

 

ASME SA387 Grade 22 Class 2 is a chromium-molybdenum (Chrome-Moly) alloy steel plate for high-temperature pressure vessels and boilers, offering excellent heat resistance, corrosion/oxidation resistance due to its chromium content (around 2.0-2.5%), and good weldability, with Class 2 indicating higher tensile strength (515-690 MPa) than Class 1, used in oil, gas, and chemical industries for demanding elevated-temperature services.

 

Key Characteristics

Material Type: Chromium-Molybdenum (Cr-Mo) Alloy Steel.

Application: Primarily for welded boilers, pressure vessels, and piping in elevated temperature service.

Grade 22: Specifies the chromium (Cr) content, typically 2.00-2.50%.

Class 2: Denotes higher mechanical strength properties compared to Class 1.

Benefits: Good high-temperature performance, corrosion resistance, oxidation resistance, and weldability.

 

Chemical Composition (Typical)

Carbon (C): 0.05 - 0.15%

Manganese (Mn): 0.30 - 0.60%

Chromium (Cr): 2.00 - 2.50%

Molybdenum (Mo): 0.90 - 1.10%

Phosphorus (P) & Sulfur (S): Max 0.025% each.

 

Industry Use
This grade is vital in the oil and gas, chemical, and petrochemical industries, where equipment must withstand high temperatures and pressures, often in sour (H₂S) gas environments.

 

aSME SA387 GR 22 CLASS 2 Plate Specification

Grade : ASTM A387 Gr 22 CL.2 Alloy Steel Plates
Standard : ASTM A387 / ASME SA387
Width : 1000mm-4500mm
Thickness : 5mm-150mm
Length : 3000mm -18000mm
Impact tested : -52° C
Process : Hot-Rolled (HR)

info-1-1

Is ASME SA387 Grade 22 Class 2 carbon steel? ?

No, ASME SA387 Grade 22 Class 2 is not plain carbon steel; it's a chromium-molybdenum (Cr-Mo) alloy steel, a type of carbon alloy steel, specifically engineered for high-temperature service in pressure vessels and boilers due to its enhanced corrosion resistance and strength at elevated temperatures. While it's based on carbon steel, the addition of chromium (around 2.00-2.50%) and molybdenum (0.90-1.10%) makes it a distinct alloy grade for demanding industrial applications like oil, gas, and petrochemical plants.

What welding rod for ASME SA387 Grade 22 Class 2 ?

For welding ASME SA387 Grade 22 Class 2, you need a low-alloy filler metal matching the base metal's 2.25% Chromium, 1% Molybdenum composition, with common choices including E9018-B3 (SMAW), ER90S-B3 (GMAW/GTAW), or EB3R (SAW), ensuring Post-Weld Heat Treatment (PWHT) like stress relief, as this Cr-Mo steel is prone to cracking.

What is ASME SA387 Grade 22 Class 2 high speed steel?

ASME SA387 Grade 22 Class 2 is a chromium-molybdenum alloy steel plate designed for high-temperature service in pressure vessels and boilers, offering excellent heat resistance, oxidation, and corrosion resistance due to its chromium and molybdenum content, with the 'Class 2' indicating higher strength (yield 45 ksi, tensile 75-100 ksi) than Class 1. It's a robust material for oil, gas, and chemical industries, known for good weldability and performance under high stress.

 

Equivalents for ASME SA387 Grade 22 Alloy Steel Plates

BS EN ASTM/ASME DIN
622-515B 10 CRMO910 SA387-22-2 10 CRMO910

 

Specifications for ASME SA387 Grade 22 Alloy Steel Plates

Designation Nominal Chromium
Content (%)
Nominal Molybdenum
Content (%)
SA387 Grade 22 2.25% 1.00%

 

Designation Nominal Chromium Content (%) Nominal Molybdenum Content (%)
A387 Grade 22 2.25% 1.00%

 

ASME A387 GR 22 CLASS 2 Chemical Composition

Grade C Mn P S Si Cr Mo
A387 Gr.22 0.05-0.15 0.30-0.60 0.035 0.035 0.50 max 2.00-2.50 0.90-1.10

 

Tensile Requirements for ASME SA387 Grade 22 Alloy Steel Plates Class 2 Plates

Designation: Requirement: Grade 22
SA387 Grade 22 Tensile strength, ksi [MPA] 75 to 100 [515 to 690]
  Yield strength, min, ksi [MPa]/(0.2% offset) 45 [310]
  Elongation in 8 in. [200mm], min % ...
  Elongation in 2 in. [50mm], min, % 18
  Reduction of area, min % 45 (measured on round specimen)
40 (measured on flat specimen)

 

1What are the typical application fields of ASME SA387 Grade 22 Class 2?

ASME SA387 Grade 22 Class 2 steel is a chromium-molybdenum alloy primarily used in pressure vessels, boilers, and heat exchangers within the oil & gas, petrochemical, and power generation industries due to its excellent strength, ductility, and resistance to high temperatures and corrosion, including in sour gas environments. Key applications include reactors, piping, turbines, and other equipment needing reliable performance under elevated pressure and thermal stress.

 

2 What are the typical application fields of ASME SA387 Grade 22 Class 2?

ASME SA387 Grade 22 Class 2 steel is a chromium-molybdenum alloy primarily used in pressure vessels, boilers, and heat exchangers within the oil & gas, petrochemical, and power generation industries due to its excellent strength, ductility, and resistance to high temperatures and corrosion, including in sour gas environments. Key applications include reactors, piping, turbines, and other equipment needing reliable performance under elevated pressure and thermal stress.

 

3What is ASME SA387 Grade 22 Class 2 material?

ASME SA387 Grade 22 Class 2 is a chromium-molybdenum (Cr-Mo) alloy steel plate for high-temperature service, primarily for welded pressure vessels and boilers in the oil, gas, and chemical industries, offering excellent heat resistance, corrosion resistance, and weldability, with specific chemical composition (around 2.25% Cr, 1% Mo) and heat treatment (normalized & tempered) requirements for enhanced strength and durability.

 

4What is ASME SA387 Grade 22 Class 2 equivalent to?

ASME SA387 Grade 22 Class 2 is equivalent to ASTM A387 Grade 22 Class 2, and internationally, its closest match is EN 10CrMo9-10, with other equivalents including BS 622-515B and French 10CD9-10, all being chromium-molybdenum alloy steels for high-temperature pressure vessels and boilers.

 

5What is the hardness of ASME SA387 Grade 22 Class 2?

ASME SA387 Grade 22 Class 2 doesn't have a strict minimum hardness requirement in the primary ASME/ASTM specification but typically falls in the range of 130 to 170 Brinell (HB) after heat treatment, offering good tensile strength (75-100 ksi) and minimum yield strength (45 ksi) for pressure vessel applications, with hardness values depending on final processing like quenching and tempering.

 

6What is the difference between ASME SA387 Grade 22 Class and ASME SA387 Grade 22 Class 1?

ASME SA387 Grade 22 Class 1 and Class 2 are both chromium-molybdenum alloy steels for elevated temperatures, but the key difference lies in their mechanical properties (strength); Class 2 offers higher tensile strength (75-100 ksi vs. 60-85 ksi) and yield strength (45 ksi vs. 30 ksi) compared to Class 1, while maintaining similar elongation, making Class 2 suitable for more demanding high-temperature, high-pressure applications.

 

7What is the P number of ASME SA387 Grade 22 Class ?

For ASME SA387 Grade 22 alloy steel, the P-Number is P5A, as it's a chromium-molybdenum steel (around 2.25% Cr, 1% Mo) classified under ASME Section IX for welding, with the "A" indicating it's ferritic/ferritic-martensitic, a common grouping for these types of pressure vessel steels.

 

 

Contact now

 

If you want to learn more about ASME SA387 Grade 22 Class 2  GNEE's products, you can send an email to info@gneesteels.com . We are more than happy to assist you.

info-812-678

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry