Jan 28, 2026 Leave a message

What type of heat treatment is required for ASME SA515 Grade 65?

What type of heat treatment is required for ASME SA515 Grade 65?

ASME SA515 Grade 65 pressure vessel plates, intended for intermediate to high-temperature service, are typically supplied in the "as-rolled" condition for thicknesses ≤2inches (50 mm), while plates over2inches (50 mm) must be normalized. Normalizing, stress relieving, or both can be ordered optionally to improve material properties.

ASME SA515 Grade 65

ASME SA515 Grade 65 is a versatile pressure vessel grade that is highly favored by fabricators for its combination of moderate strength and excellent workability. It is a "workhorse" grade for boilers, providing a tensile range of 450 to 585 MPa, which is ideal for the construction of shells, heads, and accessories that must operate in the intermediate temperature range. For the welder, SA515 Grade 65 provides a reliable response to fusion welding; for the machinist, its silicon-killed structure ensures a consistent hardness that prevents tool chattering. It provides the necessary structural safety for fusion-welded boilers while remaining more economical than specialized high-alloy steels.

 

Key Characteristics

Easy Machinability: High internal cleanliness makes it easy to drill and tap for fittings.

Cold Forming Ability: Responds well to plate rolling and bending for vessel cylinders.

High Elongation: Minimum 19–23% elongation ensures the material is ductile enough for safe deformation.

Availability: Widely stocked by steel service centers for rapid vessel repair or construction.

 

Grade Designation

Product Form: Carbon Steel Plate for Higher-Temperature Service.

Designator: Grade 65.

ASTM Equivalent: A515 Grade 65.

 

Comparison with ASME SA285 Grade C

Temperature Rating: SA515-65 is for higher temperatures; SA285-C is for ambient/moderate service only.

Strength Difference: SA515-65 is significantly stronger (65 ksi min) than SA285-C (55 ksi min).

Deoxidation: SA515-65 is always silicon-killed; SA285-C is often semi-killed or non-killed.

info-750-242

Common Applications

Secondary Reformers: High-temperature vessels in chemical plants.

Boiler Shell Plates: The outer pressure-retaining skin of industrial boilers.

Distillation Columns: Heavy-duty vertical towers for refinery heat processing.

 

Is ASME SA515 Grade 65 available in both normalized and annealed conditions?

Yes, ASME SA515 Grade 65 can be supplied in both normalized and annealed conditions, depending on the specific requirements. The normalized condition improves the material's toughness and grain structure, while the annealed condition reduces internal stresses. These processes help achieve the desired mechanical properties, such as improved strength and ductility, making the material more suitable for demanding applications.

What is the impact test requirement for ASME SA515 Grade 65?

For ASME SA515 Grade 65, impact testing is typically required at low temperatures to ensure the material's toughness. The impact test is often performed at temperatures ranging from -20°F to -40°F (-29°C to -40°C), depending on the application. The material is expected to pass these tests with a minimum of 20 ft-lbs (27 J) of energy absorption, ensuring its durability and resistance to brittle fracture.

What is ASME SA515 Grade 65?

ASME SA515 Grade 65 is a carbon steel material standard used for high-temperature pressure vessel and boiler applications. It is part of the ASME (American Society of Mechanical Engineers) specifications for plates designed to withstand pressure and heat. It has good weldability and is commonly used in power plants, refineries, and other high-temperature environments.

 

Mechnical property for ASME SA515 Grade 65 boiler steel plate:

Yield strength (Mpa) Tensile strength (Mpa) Elongation in ≥,%
240 450-585 200mm 50mm
19 23


Chemical composition for ASME  SA515 Grade 65 boiler steel plate (Product Analysis Max%)

Main chemical elements composition of A515 Grade 65
Thickness(mm) C Si Mn P S
T≤25 0.28 0.13-0.45 0.98 0.025 0.025
25 0.31
50 0.33
100 0.33

 

1. Can ASME SA515 Grade 65 be heat-treated?

Yes, ASME SA515 Grade 65 can be heat-treated to improve its mechanical properties. Heat treatments such as normalizing or annealing are commonly used to enhance strength, ductility, and toughness. The heat treatment process helps refine the grain structure and remove internal stresses, ensuring the material performs well in high-temperature and pressure applications.

 

2. What are the corrosion resistance properties of ASME  SA515 Grade 65?

ASME SA515 Grade 65 does not have high corrosion resistance on its own, as it is primarily a carbon steel material. However, it can withstand the effects of corrosion in environments that are not excessively aggressive. For environments with high corrosion potential, additional coatings or corrosion-resistant materials may be required to protect the steel from degradation.

 

3. What is the yield strength of ASME SA515 Grade 65?

The yield strength of ASME SA515 Grade 65 is typically around 65 ksi (448 MPa) at room temperature. This makes it suitable for high-stress environments, particularly in pressure vessel applications. It ensures the material can handle internal pressures without yielding or deforming, making it reliable for use in boilers and pressure vessels that operate under extreme conditions.

 

4. What are the inspection requirements for ASME SA515 Grade 65?

The inspection requirements for ASME SA515 Grade 65 typically include visual inspection, ultrasonic testing (UT), and sometimes magnetic particle or dye penetrant testing for surface defects. Mechanical tests such as tensile, impact, and hardness tests are also carried out to ensure the material meets the specified strength and toughness requirements. Inspection and certification are essential for ensuring the material is suitable for use in pressure vessels and other critical applications.

 

5. What is the tensile strength of ASME SA515 Grade 65?

The tensile strength of ASME SA515 Grade 65 typically ranges from 70 ksi to 90 ksi (483 MPa to 621 MPa). This high tensile strength makes it ideal for use in pressure vessels and other applications where the material must withstand both internal pressure and high-temperature environments. The ability to resist deformation under stress is crucial for the safe operation of industrial equipment.

 

6. What are the mechanical properties of ASME SA515 Grade 65?

The mechanical properties of ASME SA515 Grade 65 include:,Tensile Strength: 70-90 ksi (483-621 MPa),Yield Strength: 45 ksi (310 MPa) minimum,Elongation: 20% (for plates with thickness ≤ 1.5 inches),These properties indicate its good tensile strength, ductility, and ability to withstand considerable stress and strain, particularly in high-temperature environments.

 

7. What is the thickness range for ASME SA515 Grade 65 plates?

ASME SA515 Grade 65 plates are commonly available in thicknesses ranging from 3/16 inches (4.76 mm) to 6 inches (152 mm). The thickness can vary depending on the specific application, and plates can be supplied in different widths and lengths. The material's thickness is critical in determining its strength and capacity to withstand internal pressure in pressure vessel or boiler construction.

 

 

Contact now

For more details about GNEE's steel products, contact us at info@gneesteels.com. We look forward to working with you.

info-570-424

Send Inquiry

whatsapp

phone

Email

Inquiry