1. In order to avoid the deformation of the corten steel plate, when lifting the corten steel plate, four galvanized steel wire ropes of the same length must be used to hook the four lifting holes on the refractory corten steel plate to stably lift the corten steel plate on the carrier. .
2. Pad the corten steel plate support plate points and add pads to ensure that each support point is evenly supported and ensures the stability of the entire corten steel plate.
3. During installation, use adjustment pads to pad each fulcrum of the corten steel plate well and firmly, and use professional technology to adjust the corten steel plate to acceptable precision.
4. When using, handle the steel parts carefully and do not move rough steel parts on the corten steel plate to avoid bumps, scratches and other damage to the corten steel plate excavation working surface.
5. In order to prevent the overall deformation of the corten steel plate, after use, the steel parts should be taken out from the corten steel plate to avoid deformation of the corten steel plate.
6. When the corten steel plate is not needed, clean the excavation working surface in time, then apply a layer of anti-rust agent, and cover it with anti-rust paper. Cover the refractory corten steel plate with the outer packaging box of the refractory corten steel plate to avoid daily damage. Pay attention to the damage to the refractory and corten steel plate excavation working surface.
7. Corten steel plates should be installed in a ventilated, dry environment, and away from heat, corrosive gases, and corrosive liquids.
8. Corten steel plates are subject to regular weekly inspections in accordance with national industry standards, and the metrological verification cycle can be 6-12 months depending on the specific situation.
9. Corten steel plates may have certain errors under different temperature differences.
