Nov 04, 2026 Leave a message

SA-516 Gr 60 (NACE ) Pressure Vessel Plates Shipped

GNEE Steel announce the successful completion and shipment of a major order of SA-516 Gr 60 steel plates (NACE MR0175 / ISO 15156 certified) for a leading international engineering, procurement, and construction (EPC) company. The order comprises 18 different plate specifications destined for fabrication into pressure vessels, reactor shells, dished ends, and fabricated piping for sour service applications.

Key Project Highlights

  • Material: SA-516 Gr 60 / SA516GR415 (NACE MR0175-compliant)
  • Total Pieces: 35 plates across 18 specifications
  • Thickness Range: 14 mm – 50 mm
  • Certification: Full NACE MR0175 / ISO 15156 for HIC & SSC resistance
  • Application: Main shell, dish ends, channel dish, fabricated pipe

 

SA-516 Gr 60 NACE Plate  SA-516 Gr 60 NACE Plate shipping

SA-516 Gr 60 NACE Plate Specifications Shipped

 

The shipment covers a comprehensive range of thicknesses and dimensions, all manufactured to strict NACE MR0175 / ISO 15156 requirements for sour (H₂S-containing) service environments. Below is the detailed breakdown of the delivered plates:

 

Item Thickness (mm) Width (mm) Length (mm) Qty (Nos) Component
1 14 2500 12000 2 Main Shell
2 14 2500 8500 1 Main Shell / Dish Size
3 16 1250 1500 1 Fab. Pipe
4 18 2500 6500 1 Main Shell / Dish Size
5 20 2000 12000 8 Main Shell & Fab. Pipe
6 24 2500 12000 3 Main Shell / Dish Size
7 24 2500 6000 1 Main Shell
8 28 2500 12000 2 Main Shell / Dish Size
9 28 2000 12000 1 Main Shell
10 28 2000 9500 1 Main Shell
11 30 1500 11300 4 Channel Dish
12 32 2200 7300 1 Main Dish
13 40 2500 10850 8 Main Shell
14 40 2300 11000 4 Main Shell
15 40 2150 12000 2 Channel Dish
16 45 1775 1775 1 Dish
17 50 2150 10700 2 Main Dish
18 22 1250 1500 1 Dish

 

SA-516 Gr 60 Plate shipping

 

Why NACE MR0175 Compliance Matters for SA-516 Gr 60 Plates

 

In oil and gas production, refining, and petrochemical processing, equipment exposed to wet H₂S environments faces serious corrosion risks - including Hydrogen-Induced Cracking (HIC) and Sulfide Stress Cracking (SSC). SA-516 Gr 60 plates supplied under NACE MR0175 / ISO 15156 are specifically manufactured with controlled chemistry, low sulfur content, and stringent heat treatment to resist these failure modes.

 

Key Features of Our NACE-Compliant SA-516 Gr 60 Plates:

  • Low Sulfur Content: Typically ≤ 0.005% for superior HIC resistance
  • Calcium Treatment: Modified sulfide inclusions for improved through-thickness ductility
  • Normalized Condition: Fine-grained microstructure ensuring uniform mechanical properties
  • HIC Testing: Per NACE TM0284 with acceptance criteria per client specification
  • SSC Testing: Per NACE TM0177 Method A as required
  • Full MTR Traceability: Complete material test reports with heat and lot traceability

 

Applications: From Pressure Vessels to Heat Exchangers

 

The SA-516 Gr 60 NACE plates in this shipment are being used across multiple critical components:

  • Main Shell (MAIN SHELL): Cylindrical pressure vessel bodies for process reactors and separators
  • Main Dish / Channel Dish (DISH): Formed dished ends for pressure vessel heads
  • Fabricated Pipe (FAB. PIPE): Rolled and welded pipe spools for high-pressure process lines

 

These components will serve in sour crude processing, natural gas sweetening, and hydroprocessing units where resistance to hydrogen sulfide-induced cracking is non-negotiable.

 

SA-516 Gr 60 NACE plate for Pressure Vessel

 

SA-516 Gr 60 Chemical Composition (NACE MR0175)

 

The chemical composition of our NACE-compliant SA-516 Gr 60 plates is strictly controlled to ensure excellent HIC and SSC resistance in sour service environments. Below are the typical values compared with standard grade requirements:

Element Standard SA-516 Gr 60 (wt%) NACE MR0175 / HIC Grade (wt%)
Carbon (C) ≤ 0.27 ≤ 0.24
Manganese (Mn) 0.85 – 1.20 0.85 – 1.20
Phosphorus (P) ≤ 0.035 ≤ 0.015
Sulfur (S) ≤ 0.035 ≤ 0.005
Silicon (Si) 0.15 – 0.40 0.15 – 0.40
Copper (Cu) ≤ 0.40 ≤ 0.40
Nickel (Ni) ≤ 0.25 ≤ 0.25
Chromium (Cr) ≤ 0.30 ≤ 0.30
Molybdenum (Mo) ≤ 0.08 ≤ 0.08
Carbon Equivalent (CEV) - ≤ 0.43

Key NACE controls: Ultra-low sulfur (≤ 0.005%), calcium-treated for globular inclusion shape control, and restricted carbon equivalent for optimal weldability and HIC resistance.

 

SA-516 Gr 60 Mechanical Properties (NACE Condition)

 

All plates in this shipment were supplied in the normalized condition with full mechanical property testing per ASTM A370 and NACE MR0175 hardness requirements.

Property Requirement Typical Value
Tensile Strength, min 415 MPa (60 ksi) 450 – 520 MPa
Tensile Strength, max 550 MPa (80 ksi) -
Yield Strength, min 220 MPa (32 ksi) 260 – 310 MPa
Elongation (50 mm), min 27% 30 – 35%
Elongation (200 mm), min 21% 23 – 26%
Hardness, max (NACE) 22 HRC / 235 HBW 170 – 200 HBW
Charpy V-Notch Impact Per project spec ≥ 27 J @ -46°C
HIC Resistance (CLR) Per NACE TM0284 ≤ 5% (typical)
HIC Resistance (CTR) Per NACE TM0284 ≤ 2% (typical)
HIC Resistance (CSR) Per NACE TM0284 ≤ 0.5% (typical)

Note: Actual values are reported on each individual Material Test Report (MTR) with full heat and plate traceability. HIC acceptance criteria can be tailored to specific project requirements (standard / severe / zero-cracking levels).

 

SA-516 Gr 60 steel mtc

 

Need SA-516 Gr 60 NACE Plates for Your Project?

 

We maintain extensive stock and production capacity for NACE-compliant pressure vessel steel plates. Whether you need a single plate or a full project package, we are ready to support you with competitive pricing and fast delivery.

 

📋Get a Free Quote:Send us your material specification and quantity. Receive a detailed technical and commercial offer within 24 hours.

 

🔬Technical Consultation:Unsure which grade or NACE solution fits your H₂S service conditions? Our metallurgical engineers can help.

 

📦Stock Availability Check:Need plates urgently? Check our ready stock of SA-516 Gr 60 NACE plates in various thicknesses and sizes.

 

About Our Pressure Vessel Plate Capabilities

As a specialized supplier of pressure vessel and boiler quality steel plates, we serve EPC contractors, fabricators, and end-users across the oil & gas, petrochemical, power generation, and renewable energy sectors worldwide. Our SA-516 Gr 60 plates are sourced from reputable mills and fully tested to ensure compliance with ASTM, ASME, and NACE standards.

 

Grades We Supply: SA-516 Gr 55, Gr 60, Gr 65, Gr 70 | SA-387 Gr 11, Gr 12, Gr 22 | SA-537 Class 1/2/3 | and other NACE MR0175 compliant grades.

 

Ready to Source SA-516 Gr 60 NACE Plates?

Contact our international sales team today for a competitive quotation. Worldwide shipping, full documentation, and NACE certification guaranteed.

Send Your Inquiry Now

FAQ

 

What is SA 516 GR 60 material?

ASME SA 516 Grade 60 (SA 516 Gr 60) is a standard carbon-manganese pressure vessel steel plate designed for use in welded pressure vessels, boilers, and storage tanks where moderate-to-low temperatures and good notch toughness are required.

 

What is the difference between SA516 GR 60 and SA516 GR 70?

The main difference between ASME SA516 Grade 60 and Grade 70 is their strength and carbon content: Grade 70 offers higher tensile and yield strength for high-pressure vessels, while Grade 60 has lower carbon content, making it easier to weld and form with higher ductility

 

What is the Indian standard equivalent of ASTM A516 Grade 60?

The Indian Standard equivalent for ASTM A516 Grade 60 (carbon steel for moderate and lower-temperature pressure vessel service) is IS 2002 Grade 1 (for legacy/elevated temperature applications) or IS 2041 (such as R220 or H235) for modern boiler and pressure vessel steel specifications

 

 

Send Inquiry

whatsapp

phone

Email

Inquiry