-
Feb 20, 2024Die Steel Industry PolicyDie steel is used to make cold stamping die, hot forging die die casting die and other die steel. -
Feb 18, 202430W4Cr2V Is A High Quality Spring Material30W4Cr2VA Due to the role of tungsten-chromium-vanadium, this steel has good room temperature and high temperature mechanical properties and particularly high hardenability, goo... -
Feb 06, 2024What Material Is SF-2000 LQ40SF-2000LQ40 die steel is a pre-hardened die steel, which is electroslag remelting steel. The hardness of the pre-hardened state is 38-42HRC, the Brinell hardness is 355-390HB, a... -
Feb 06, 2024What Material Is 65Mn65Mn steel is read as 65 manganese and is a commonly used spring steel. It has high strength, good hardenability, small decarbonization tendency, good cutting ability, but it ha... -
Feb 06, 20245CrNiMo Is Hot Work Die Steel Or Plastic Steel5CrNiMo steel has good toughness, strength and high wear resistance, and is a hot work die steel. Its mechanical properties at room temperature and 500 ~ 600℃ are almost the sam... -
Feb 05, 2024M35 High Speed Steel Tool Usage InstructionsM35 is equivalent to domestic die steel: W6Mo5Cr4V2Co5 standard: GB/T 9943-1988, through appropriate heat treatment, can get high hardness (HRC67 ~ 70), high red hardness (625℃4... -
Feb 05, 2024What Material Is M35M35 cobalt high speed steel compared with low price and easy processing, through appropriate heat treatment, can obtain high hardness (HRC67 ~ 70), high red hardness (625℃ for 4... -
Feb 05, 2024What Material Is SKD12SKD12 is a high-carbon and high-chromium tool steel with excellent wear resistance, hardness and corrosion resistance. It is usually used to manufacture high strength cutting to... -
Feb 05, 2024SKD11 Die Steel MaterialSKD11 is a universal cold work die steel with high wear resistance and toughness, high carbon and high chromium alloy tool steel and vacuum degassing refined steel, with pure st... -
Feb 05, 2024Differences And Comparisons Between A2 And SKD11The hardness of A2 after heat treatment is higher than SKD11, and the high temperature (500-520℃) after tempering can reach 60-62HRC high hardness, which exceeds SKD11 in strength. -
Feb 04, 2024What Material Is W18Cr4VW18Cr4V is a commonly used tungsten high-speed steel, belongs to Letenite steel, also known as "wind steel" or "front steel". -
Feb 04, 2024W18Cr4V Heat Treatment SpecificationW18Cr4V is tungsten high speed steel with high hardness, red hardness and high temperature hardness. Its heat treatment range is wide, quenching is not easy to overheat, heat tr...




