-
Nov 25, 2024SB410 Boiler Plate: JIS G 3103 Chemistry and Tensile LimitsSB410 is a JIS G 3103 carbon steel plate for boilers and pressure vessels, where the grade number marks a 410-550 MPa tensile band rather than a yield value. This guide sets out th -
Nov 25, 2024Chemical Properties of 14Cr1MoR Boiler Grade Plate Explained14Cr1MoR is a 1.25Cr-0.5Mo vessel plate whose chemistry table is the real specification behind its mechanical results. This analysis covers each specified element, the residual and -
Nov 25, 202414Cr1MoR Pressure Vessel Plate: Composition, Properties14Cr1MoR is a 1.25Cr-0.5Mo pressure vessel plate grade in GB/T 713, supplied normalised and tempered with thickness-graded tensile and impact requirements. This guide explains what -
Nov 25, 2024SB410 Pressure Vessel Steel: Properties, Service Limits, UsesSB410 is the standard carbon steel plate for ordinary boiler and pressure vessel work, and its value lies in predictable welding, forming and normalising behaviour rather than high -
Nov 21, 202415MnNiDR Vessel Plate: Chemistry, Toughness and Welding15MnNiDR is a nickel-bearing low-temperature pressure vessel steel plate standardised in GB/T 3531 and normally selected for service down to about -40 C. This article explains its -
Nov 21, 202409MnNiDR Pressure Vessel Plate: Chemistry and -70 C Toughness09MnNiDR is a normalised low-alloy plate for cryogenic pressure vessels, defined by GB/T 3531 with a -70 degrees C Charpy requirement. This article sets out the heat-analysis limit -
Nov 21, 202409MnNiDR Plate at -70 C: Composition, Welding, Applications09MnNiDR is a low-carbon, nickel-bearing pressure vessel plate to GB/T 3531 qualified for approximately -70 C service. This article covers the composition and grain-refinement cont -
Nov 21, 202416MnDR Plate: Chemistry, -40 C Toughness and Weldability16MnDR is a normalized manganese steel plate for pressure vessels operating down to about -40 C, specified under GB/T 3531. Its acceptance rests on three things together: a tight c -
Nov 21, 202416MnDR Vessel Plate: -40 C Toughness, Properties and Uses16MnDR is the standard normalised steel for pressure vessels operating down to -40 degrees C, positioned between room-temperature Q345R and nickel-alloyed cryogenic grades. The art -
Nov 19, 202414Cr1MoR Plate: 1.25Cr-0.5Mo Chemistry and PWHT Control14Cr1MoR is a 1.25Cr-0.5Mo pressure-vessel plate covered by GB/T 713.2 and corresponding to SA387 Gr.11 Class 2, used for hydrogen service and high-temperature, high-pressure equip -
Nov 14, 2024S235J2W Weathering Steel Plate: Composition and WeldabilityS235J2W is a copper-bearing structural plate grade in EN 10025-5 that combines a 235 MPa minimum yield strength with 27 J Charpy impact energy at -20 degrees C and a verified atmos -
Nov 14, 202409CuPCrNi-A Weather-Resistant Steel Plate: Performance and Properties09CuPCrNi-A is a copper-phosphorus-chromium-nickel weathering steel plate for structures that stay exposed to the atmosphere. It combines a 295 MPa minimum yield strength with corr




