-
Dec 31, 2024S355G3 Offshore Steel Plate: EN 10225 Grade ExplainedS355G3 is an offshore structural steel plate under EN 10225 with 355 MPa minimum yield and a defined Charpy toughness group. This guide sets out its chemistry limits, how yield str -
Dec 31, 2024ASTM A633 Grade A Plate: Properties, Chemistry and WeldingASTM A633 Grade A is a normalized high-strength low-alloy structural plate specified at 290 MPa minimum yield and 430-570 MPa tensile. This guide explains its chemistry limits, why -
Dec 26, 2024P355M Pressure Vessel Steel Plate: EN 10028-5 Grade ExplainedP355M is a thermomechanically rolled fine grain steel for pressure equipment under EN 10028-5, combining a 355 MPa minimum yield with guaranteed sub-zero Charpy toughness. This gui -
Dec 26, 2024P420M Pressure Vessel Steel: TMCP Grade Properties and WeldingP420M is a thermomechanically rolled weldable fine-grain steel for pressure equipment with a 420 MPa minimum yield, tapering to 390 MPa in heavier plate. This guide explains its ch -
Dec 23, 2024S960Q Quenched and Tempered Steel Plate: Chemistry and WeldingS960Q is the room temperature impact variant of the highest quenched and tempered structural grade in EN 10025-6, with a 960 MPa minimum yield strength for plate from 3 mm to 50 mm -
Dec 23, 2024S960QL High Strength Steel PlateS960QL High Strength Steel Plate S960QL alloy steel plate is a high-strength steel plate that belongs to the European standard high-strength structural steel plate. It has ex -
Dec 20, 2024Why AISI 4340 Alloy Steel Loses Hardness After Tempering at 400 °CA hardness result below expectation after tempering AISI 4340 at 400 °C is usually caused by the heat treatment process, by a composition or hardenability issue, or by the hardness -
Dec 18, 2024S890Q high strength steel plateS890Q high strength steel plate S890Q high strength steel plate is a European standard modulated high strength plate with high performance, high strength and good corrosion r -
Dec 18, 2024S890QL Quenched and Tempered Plate: Properties and WeldingS890QL is a quenched and tempered structural plate to EN 10025-6 with a minimum yield strength of 890 MPa and a verified Charpy class of 30 J at -40 degrees C. This guide explains -
Dec 18, 2024S890QL1 Plate: 890 MPa Steel for -60 °C ServiceS890QL1 is the -60 °C impact variant of the 890 MPa quenched and tempered structural grade in EN 10025-6, supplied from 3 mm to 100 mm with a step down to 830 MPa minimum yield abo -
Dec 09, 2024S690Q Alloy Steel Plate: Performance, Composition and Mechanical PropertiesS690Q is a quenched and tempered high strength structural steel plate specified in EN 10025-6 with a minimum yield strength of 690 MPa. This article explains its chemical compositi -
Dec 09, 2024S690QL Low Alloy Steel Plate: Performance and Mechanical PropertiesS690QL is a quenched and tempered low alloy structural steel plate with a 690 MPa minimum yield strength and guaranteed impact toughness at minus 20 degrees Celsius. The article co




