-
Nov 14, 2024Q355NH Weathering Steel: GB/T 4171 Grades and FabricationQ355NH is the mid-strength grade of the GB/T 4171 weather resistant structural steel family, specified with defined copper, chromium and nickel ranges that form a protective oxide -
Nov 14, 2024ASTM A588 Grade B Weathering Steel: Properties and FabricationASTM A588 Grade B is a 345 MPa high-strength low-alloy plate grade whose copper, chromium, nickel and vanadium balance produces a stable protective oxide layer in bare exposure. Th -
Nov 14, 2024S355J0W Weathering Steel Plate: Composition and WeldabilityS355J0W is a weather resistant structural steel plate specified in EN 10025-5, with 355 MPa minimum yield at thin sections and 27 J Charpy impact at 0 degrees C. This guide sets ou -
Nov 11, 202415CrMoR Boiler Steel Plate: Composition and Properties15CrMoR is a chromium-molybdenum pressure vessel and boiler steel plate specified by GB/T 713, with a carbon content around 0.15% and deliberate chromium and molybdenum additions t -
Nov 11, 202415CrMoR Pressure Vessel Plate: Cr-Mo Chemistry and Welding15CrMoR is a GB/T 713 chromium-molybdenum vessel plate built on a 1.25Cr-0.5Mo balance for service between roughly 350 and 550 degrees Celsius. This article sets out its chemistry -
Nov 11, 202412Cr1MoVR Pressure Vessel Plate: Properties, Heat Treatment and Uses12Cr1MoVR is a chromium-molybdenum-vanadium heat-resistant plate to GB/T 713 for high-pressure boilers and vessels. The article covers its chemical range, strength values, heat tre -
Nov 11, 202412Cr1MoVR Cr-Mo Pressure Vessel Plate: Chemistry and Properties12Cr1MoVR is the vanadium-modified 1.25Cr-0.5Mo plate grade of GB/T 713, supplied normalised and tempered for boiler and pressure vessel service at elevated temperature. Its carbon -
Nov 11, 202413MnNiMoR Pressure Vessel Steel: Chemistry and Properties13MnNiMoR is a Mn-Ni-Mo low-alloy plate grade under GB/T 713.2 for medium- and low-temperature pressure vessels, delivering 570-720 MPa tensile strength with 0 degrees C toughness. -
Nov 06, 2024Q370R Boiler Quality Plate: Strength, Weldability and Cold FormingQ370R is a microalloyed carbon-manganese plate to GB/T 713 with a 370 MPa minimum yield strength, 490 to 630 MPa tensile strength and at least 22 percent elongation. The article co -
Nov 06, 2024Q345R Pressure Vessel Steel Plate: Properties, Welding and ApplicationsQ345R is the standard carbon-manganese plate for boilers and pressure vessels under GB/T 713. The article explains its chemical limits, stepwise yield strength by thickness, impact -
Nov 06, 2024Application of Q345R Boiler Plate in Pressure Vessels and BoilersQ345R boiler plate is a low-alloy plate grade for boilers and pressure vessels, widely used in petroleum, chemical and power-station equipment. It offers high strength, good toughn -
Nov 06, 2024Q245R Boiler Plate: Composition, Properties and WeldabilityQ245R is the GB/T 713 carbon steel plate grade used for boiler drums, heat exchanger shells and low-pressure vessel bodies. This guide sets out its ladle analysis limits, thickness




