-
Mar 28, 2024NM450 Steel Plate for Truck Linings: Hardness, Welding, ThicknessNM450 is a 450 HBW class abrasion resistant plate under GB/T 24186, widely used as a floor and side-wall liner in tipper bodies and bulk trailers. This guide explains how the hardn -
Mar 28, 2024NM450 Wear Plate: Hardness, Strength and Weldability DataNM450 is a 450 HBW abrasion-resistant plate defined in GB/T 24186, used for chute liners, truck bodies and crusher wear parts. This guide sets out its chemistry, mechanical propert -
Mar 28, 2024NM400 Wear Resistant Steel Plate: Hardness, Composition and ApplicationsNM400 wear resistant plate is a quenched and tempered steel plate produced under GB/T 24186 with a delivered hardness of 360 to 430 HBW. The low carbon martensitic structure combin -
Mar 28, 2024ASTM A588 Gr A Weathering Steel Plate: Properties GuideA588 Gr A is a 345 MPa minimum yield high-strength low-alloy plate that forms a stable patina under cyclic wet-dry exposure. This guide covers its chemistry limits, mechanical requ -
Mar 28, 2024EH36 Hull Steel Plate: -40 C Toughness, Chemistry and WeldingEH36 is a 355 MPa minimum yield hull structural grade impact tested at minus 40 degrees Celsius. This guide covers its chemistry, toughness verification, delivery conditions and th -
Mar 28, 2024AH36 Steel Plate: 355 MPa Hull Grade at 0 C Impact TestingAH36 is the zero degrees Celsius impact grade of the 355 MPa hull structural family. This article explains its chemistry, toughness acceptance, rolling routes, yard welding practic -
Mar 28, 2024A299 Grade A Steel Plate: Properties and Boiler UseA299 Grade A is a manganese-silicon carbon steel plate for welded boilers and pressure vessels, specified with a 290 MPa minimum yield and available up to 305 mm thick. This guide -
Mar 28, 2024A299 Grade B Steel Plate for Boiler Drum ConstructionA299 Grade B is the higher-strength grade of the manganese-silicon pressure vessel plate family, specified at 325 MPa minimum yield for thick boiler drum courses. This article expl -
Mar 28, 2024CCS Grade B Hull Structural Steel Plate: Composition and WeldingCCS Grade B is a normal-strength hull structural steel with 235 MPa minimum yield and Charpy impact testing at 0 degrees C. This guide covers its chemistry limits, mechanical accep -
Mar 28, 2024Q345R vs A516 Gr 70: Pressure Vessel Steel Plate ComparisonQ345R and A516 Gr 70 are two of the most widely ordered pressure vessel plate grades. This article compares their designation logic, chemical composition, yield and tensile strengt -
Mar 28, 2024Q245R Boiler Plate: Composition, Welding and AcceptanceQ245R is a carbon-manganese boiler and pressure vessel plate to GB/T 713 with 245 MPa minimum yield and tightly restricted phosphorus and sulphur. This guide covers its chemistry, -
Mar 28, 2024Q345R Pressure Vessel Steel Plate: Composition and PropertiesQ345R is the C-Mn pressure vessel plate grade of GB/T 713, specified at 345 MPa minimum yield with a 510-640 MPa tensile range. This guide covers its composition limits, thickness-




