-
Mar 26, 2024SUP11 Spring Steel: Composition, Properties and Stress RelaxationSUP11 is a chromium-boron spring steel specified in JIS G4801, mainly used to manufacture springs and mechanical parts. The addition of chromium improves hardenability and temperin -
Mar 26, 202425CrMo4 Alloy Steel: 1.7218 Chemistry, Hardening and Welding25CrMo4 is a 0.25 percent carbon chromium-molybdenum steel to EN 10083-3, material number 1.7218, widely used for quenched and tempered structural parts and welded tube frames. Thi -
Mar 26, 202430CrMnSiA Alloy Structural Steel: Properties, Heat Treatment and Applications30CrMnSiA is a medium carbon alloy structural steel of the quenched and tempered family, combining high strength with sufficient toughness and good hardenability. It is delivered h -
Mar 26, 202412Cr1MoV Heat-Resistant Steel: Composition and Boiler Use12Cr1MoV is a low-carbon chromium-molybdenum-vanadium steel used for superheater and reheater tubing, headers and main steam piping in power station boilers. This article sets out -
Mar 25, 2024X52 Pipeline Steel: Characteristics, API 5L Properties and ApplicationsX52 is a carbon manganese line pipe grade defined in API Spec 5L and ISO 3183, where it is designated L360. The article explains its yield and tensile limits, the difference betwee -
Mar 25, 2024X70 Steel Plate: API 5L Properties, Welding and Linepipe UsesX70 is a 485 MPa minimum yield linepipe steel specified by performance under API 5L rather than by a fixed chemistry, and it is the backbone of high-pressure gas and oil transmissi -
Mar 25, 2024X70 Pipeline Steel Plate: Composition, Properties, WeldabilityX70 (L485) plate is a thermomechanically rolled line pipe steel whose properties depend as much on the rolling schedule as on its chemistry. This guide sets out the composition cei -
Mar 25, 2024Rust Removal Methods and Correct Maintenance of Low Alloy Steel PlatesLow alloy steel plates are not stainless steels: they rely on a coating system rather than a passive chromium oxide film. This article grades the rust condition of a plate, explain -
Mar 25, 2024Wear-Resistant Steel Plate: Hardness, Wear Life and Grade SelectionWear-resistant steel plate is a two-layer composite with a chromium carbide wear layer of HRC 58-62 bonded to a Q235 or Q345 structural base, giving 15-20 times the abrasion life o -
Mar 25, 2024Applications of weathering steelWeathering steel, also known as atmospheric corrosion-resistant steel, is a kind of low-alloy steel made by adding a small amount of specific alloying elements to ordinary steel. -
Mar 25, 2024Characteristics and Uses of X52 Pipeline Steel to API Spec 5L and ISO 3183X52 remains the workhorse grade of oil and gas transmission lines because it balances strength, weldability and cost. This article sets out the specified yield and tensile limits, -
Mar 25, 2024X65 Line Pipe Steel: PSL2 Chemistry, Toughness and WeldabilityX65 is a 450 MPa minimum yield line pipe grade defined by API Spec 5L and mirrored in GB/T 9711 and ISO 3183. This guide explains the PSL1 and PSL2 difference, the chemistry and ca




