-
Mar 28, 202416MnDR Low-Temperature Steel Plate: Chemistry and Toughness16MnDR is a normalized manganese pressure vessel plate specified in GB/T 3531 for service down to minus 40 C. This article explains its composition limits, tensile and impact requi -
Mar 28, 2024SA516 Gr.70 Boiler and Pressure Vessel Plate: Chemistry and UseSA516 Gr.70 is the most widely used carbon steel plate for boilers and pressure vessels, specified to ASTM A516/A516M and ASME SA516. This guide sets out the thickness-dependent ch -
Mar 27, 202415MnNiNbDR Cryogenic Pressure Vessel Steel Plate to GB/T 353115MnNiNbDR is the minus 50 degrees C grade of GB/T 3531, bridging 16MnDR at minus 40 degrees C and 09MnNiDR at minus 70 degrees C. This guide covers its niobium-based grain refinin -
Mar 27, 202416MnDR Steel Plate for Cryogenic Pressure Vessels: Chemistry and Properties16MnDR is the manganese-bearing, low-temperature pressure vessel steel plate defined by GB/T 3531. It is delivered in the normalized condition for service down to -40 degrees C, wi -
Mar 27, 2024ASTM A537 Pressure Vessel Steel Plate: Classes, Heat Treatment and Delivery C...ASTM A537 is a heat-treated carbon-manganese-silicon plate specification for welded pressure vessels and low-temperature structures. This page covers the Class 1, 2 and 3 strength -
Mar 27, 2024A387 Grade 11 Plate: 1.25Cr-0.5Mo for Pressure VesselsASTM A387 Grade 11 is a 1.25% Cr - 0.5% Mo plate for welded pressure vessels in elevated-temperature hydrogen and sulphidic service, supplied normalized and tempered in Class 1 or -
Mar 27, 2024NM450 Wear Plate: 450 HBW Abrasion-Resistant Steel UsesNM450 is a GB/T 24186 quenched and tempered wear plate supplied at a nominal 450 HBW through the full thickness, used for chute liners, truck bodies, crusher parts and bucket shell -
Mar 27, 2024NM450 Wear Plate: Key Features ExplainedNM450 is a high-strength abrasion-resistant steel plate widely used in China and exported internationally for wear parts in mining, metallurgy, cement and heavy machinery. The numb -
Mar 26, 2024SPV315 Pressure Vessel Steel Plate: Manufacturing and Quality ControlSPV315 is a JIS G 3115 carbon-manganese plate grade positioned between SPV235 and SPV355 for intermediate-temperature pressure vessels. This article follows the plate from charge s -
Mar 26, 2024SPV315 Plate Properties: Tensile, Impact and Temperature LimitsSPV315 performance data reduce to chemistry, tensile values that shift with thickness, an impact requirement at a stated temperature and a declining allowable stress above 350 to 4 -
Mar 26, 2024SPV235 Pressure Vessel Steel Plate: JIS G 3115 Grades and WeldingSPV235 is the lowest-strength grade of the JIS G 3115 pressure vessel plate series, defined by a 235 MPa minimum yield and a 400 to 510 MPa tensile range. This article explains how -
Mar 26, 2024SUP10 Spring Steel: Composition, Heat Treatment and PropertiesSUP10 is a chromium vanadium spring steel defined in JIS G4801 and used for coil springs, torsion bars and similar elastic parts. The article covers its composition, hardening and




