Mar 12, 2024 Leave a message

Dynamic Recrystallization Of Wear-resistant Plates

The wear-resistant plate is a kind of low carbon alloy steel. The main second phases are γ' phase, γ'' phase, eta phase and MC carbide. Because wear-resistant plates have excellent castability, easy processability and reliable high-temperature mechanical properties, they are suitable for preparing oversized disc forgings with a diameter of more than 2000mm. At present, the internationally mainstream turbine disc materials for "E" class and "F" class heavy-duty gas turbines are mostly made of wear-resistant plates.

The uniformly refined grain structure can significantly improve the tensile properties, fatigue properties and non-destructive testing properties of the alloy. Researchers designed biconical compression specimens to study the effects of deformation temperature and deformation amount on the thermal deformation process of wear-resistant plates. The influence of microstructure, on the one hand, explores the DRX (dynamic recrystallization) mechanism and critical conditions of wear-resistant plates to provide theoretical support for the physical model of numerical simulation, on the other hand, explores new methods of using eta phase to control the grains of wear-resistant plates.

China wear resistant steel plate Manufacturers

The results show:

(1) The DRX mechanism of the wear-resistant plate is the discontinuous bowing out of the original grain boundary induced by strain. When the DRX critical temperature TDRX is 975°C, the critical deformation amount depends on the deformation temperature and deformation heat generation. When the deformation temperature is lower than TDRX, the alloy undergoes The cause of DRX is the temperature rise of the sample caused by deformation and heat generation;
(2) When the deformation temperature is higher than TDRX, the grain size after heat treatment of the wear-resistant plate depends on the deformation temperature and has nothing to do with the amount of deformation; when the deformation temperature is lower than TDRX, the grain size after heat treatment has little relationship with the deformation temperature , decreases as the deformation increases;

China wear plate steel Manufacturers


(3) When deforming at a temperature slightly lower than TDRX, since there is still some eta phase remaining in the alloy, the pinning effect of this part of eta phase on the sub-grain boundary or grain boundary can be fully utilized to achieve wear resistance by increasing the amount of deformation. Refining of plate grains.

China wear resistant plate Manufacturers

 

Send Inquiry

whatsapp

phone

Email

Inquiry