Dec 26, 2025 Leave a message

GNEE Rush-Ships 350t S890Q Plates to Brazil in 30 Days

With the recovery of Brazil's mining economy, demand for high-strength steel plates for large mining infrastructure projects has grown sharply. GNEE recently fulfilled an urgent order from a Brazilian mining company - 350 tons of S890Q high-strength steel plates for mine conveyor corridors, delivered within a 30-day window. The batch completed production, inspection and packaging on schedule and shipped from Tianjin Port to Rio de Janeiro.

 

 S890Q high-strength steel plate

 

1. The Grade: S890Q Quenched-and-Tempered Steel

S890Q (EN 10025-6) is a quenched-and-tempered (Q+T) high-strength structural steel: the 890 MPa yield level is achieved by hardening the plate (quench from austenitizing temperature) followed by tempering, not by microalloying a Q345B base. Correct mechanical requirements: yield strength ≥890 MPa for thicknesses up to 50 mm (≥830 MPa for 50–100 mm) and tensile strength 940–1100 MPa. The plates supplied for this order were customized for the harsh mining environment: thickness 16–100 mm, width 3000 mm, length 10000 mm, with optimized impact resistance and wear resistance.

 S890Q steel plate

2. Corrosion Protection for the Mining Atmosphere

Brazil's mining areas combine year-round high temperature, heavy rainfall and corrosive dust, so the customer required good weather resistance and rust prevention. GNEE applied a fluorocarbon paint coating with a coating thickness of at least 80 μm. The 15-year service life quoted in the project documentation is a design expectation based on the coating system and environment; the coating thickness and adhesion were verified at production.

 

3. Two Manufacturing Challenges Overcome

 

1. Deformation resistance. Mine conveyor corridors demand plates with high rigidity under long-term load and environmental stress. The technical team controlled the rolling and heat-treatment process to produce fine, uniform grains, improving hardness and deformation resistance. Testing showed a 100% pass rate on the bend test at a bend radius of three times plate thickness.

 

2. Cutting accuracy for large plates. Part of the order required special-shaped connector parts with a cutting error limit of ±2 mm. GNEE activated CNC plasma cutting with a dedicated programming team, optimized the cutting paths through 3D modelling and preheated the plates to reduce thermal deformation - all special-shaped parts met the customer's tolerance requirement.

 

4. Delivery Execution

The delivery cycle was nearly 40% shorter than regular orders. GNEE adjusted the production plan, prioritized raw-material supply and process connections for this order, ran a 24-hour shift system in the workshop, and tracked quality testing throughout. Considering Brazilian port handling conditions, the plates were packed in fumigated wooden crates with anti-collision corner protectors, preventing transit damage.

 

5. Market Position

Brazil is a major South American mining country with growing demand for high-strength steel plates. Through product quality, customized solutions and efficient delivery, GNEE has established long-term relationships with several Brazilian mining enterprises; this urgent order consolidates its position in the South American mining-infrastructure materials market.

With the continuous recovery of Brazil's mining economy, the demand for high-strength steel plates for large-scale local mining infrastructure projects is growing increasingly urgent.

 S890Q steel plate

Request A Quote

 

If you are looking for an S890Q steel plate supplier suitable for energy and tank projects in the Middle East, please contact GNEE Steel to obtain technical support and quotation solutions.

 

Q1: What is S890Q steel plate?

A:S890Q is a high-strength structural steel plate according to EN 10025-6, supplied in quenched and tempered (Q) condition, with a minimum yield strength of 890 MPa.

Q2: What is the material number of S890Q?

A:The European material number for S890Q is 1.8940.

Q3: Is S890Q considered non-alloy steel?

A:Yes. Under EN classification, S890Q is listed as non-alloy structural steel, although small alloying elements are added for strength and toughness control.

Q4: What thickness range is available for S890Q steel plate?

A:Common supply thickness ranges from 6 mm to 150 mm, depending on mill capability and standard requirements.

Q5: What are the mechanical properties of S890Q?

A:

Yield strength: ≥ 890 MPa (≤ 50 mm)

Tensile strength: 940–1100 MPa

Elongation: ≥ 11%

Impact test: ≥ 30 J at −20°C

Q6: Can S890Q steel be welded easily?

A:Yes, S890Q has good weldability, but welding must follow controlled procedures, including proper heat input, preheating (if required), and suitable filler materials.

Q7: What is the difference between S890Q and S890QL?

A:S890QL offers better low-temperature impact toughness than S890Q and is typically specified for colder environments or critical structures.

Q8: What are typical applications of S890Q steel plate?

A:S890Q is widely used in:

Cranes and lifting equipment

Bridges and heavy structures

Mining and earthmoving machinery

Wind power and offshore structures

Heavy-duty vehicle frames

Q9: Can S890Q replace S690Q to reduce weight?

A:Yes. Using S890Q instead of S690Q allows significant weight reduction while maintaining or increasing load capacity, which is especially valuable for mobile equipment.

Q10: What inspection and certificates are required for S890Q?

A:Standard supply includes EN 10204 3.1 MTC.

3.2 certificates, ultrasonic testing (UT), and third-party inspection (SGS, BV, TUV) are available upon request.

Q11: Is S890Q suitable for pressure vessel applications?

A:No. S890Q is a structural steel, not designed for pressure vessel or boiler applications. Pressure vessel steels must comply with specific PV standards such as EN 10028 or ASME.

Q12: What delivery condition is required for S890Q steel plate?

A:S890Q must be supplied in quenched and tempered (Q) condition as per EN 10025-6.

Q13: Can you cut or machine S890Q steel plate?

A:Yes. Flame cutting, plasma cutting, and machining are possible with controlled parameters to maintain material properties.

Q14: Does S890Q steel require special storage or handling?

A:Standard dry storage is sufficient. Surface protection can be added for long-term outdoor storage.

Send Inquiry

whatsapp

phone

Email

Inquiry