Mar 18, 2024 Leave a message

Heat Treatment Process Of High-strength Wear-resistant Plate

GNEE STEEL is a professional steel supplier.GNEE specializes in the manufacturing of steel plate and its diverse range of associated products. Our portfolio covers a wide spectrum, catering to various industrial and commercial applications.

China wear resistant steel plate Suppliers

Heat treatment process of high-strength wear-resistant plate
High-strength wear-resistant plate is a deformed martensite α+β two-phase hot-strength alloy whose nominal composition contains a variety of elements. The alloy contains elements with high melting points such as Mo and W. It has good thermal strength and wear resistance. Its service life can be more than ten times that of ordinary wear-resistant materials. It is suitable for manufacturing engineering machinery and equipment, mining equipment and wear-resistant materials in various industries. Parts accessories etc.

High-strength wear-resistant plates can be processed into forgings, die forgings, bars, plates and other forms of products. At present, there are many domestic studies on bars, forgings and die forgings of this alloy, but there is little research on plate technology. Scientific researchers mainly study the effects of different heat treatment processes on the mechanical properties of plates, and explore a reasonable heat treatment process for high-strength wear-resistant plates, which will provide reference for the future development, production, promotion and application of high-strength wear-resistant plates.

China wear plate steel Manufacturers

The test uses JFE-C400 wear-resistant plate that has been remelted by vacuum consumption three times. The chemical analysis method is used to analyze the composition of the ingot (mass fraction, %) as Al6.2~7.2, Mo1.5~2.5, Zr0.8~ 2.5, Sn0.8~2.5, W0.5~1.5, Si0.10~0.25, C≤0.10, Fe≤0.15, H≤0.10, O≤0.10, N≤0.04. The alloy phase transformation point was determined by metallographic method to be (1020±2)℃. After the ingot is cut by a 3150t fast forging machine and a 3t electro-hydraulic hammer, it is hot rolled into a plate with a thickness of 10.0mm. The plate samples were subjected to different heat treatments for mechanical properties and microstructure analysis.

Wear-resistant plates can be either ordinary annealed or double annealed. Ordinary annealing is to heat the alloy to an appropriate temperature and hold it for a certain period of time before cooling; while double annealing is to first heat the alloy to an appropriate temperature (referred to as the "first annealing temperature"), maintain it for a certain period of time, cool it and then reheat it to a certain temperature (referred to as the "first annealing temperature"). is the "second annealing temperature") and then cooled after being kept warm for a certain period of time. The common annealing temperatures used in the test are 880, 900, 920 and 950°C, and the insulation is for 1 hour. The cooling methods are air cooling, water cooling and oil cooling. Double annealing is 950℃×1h, air cooling + 560℃×6h, air cooling.

China wear resistant plate Distributors

The results showed that:

(1) Compared with ordinary annealing and double annealing of high-strength wear-resistant plates, the plasticity of ordinary annealing is higher than that of double annealing. Considering that the plastic index of high-strength wear-resistant plate is relatively high, ordinary annealing is adopted.

(2) In the range of 880 to 950°C, as the annealing temperature increases, the strength of high-strength wear-resistant plates slowly increases, and the plasticity first increases and then decreases. When the annealing temperature is 900, the strength and plasticity can be well matched.

(3) Through the comparison of strength and plasticity under different cooling rates (air cooling, oil cooling and water cooling), the strength and plasticity under water cooling conditions are the best.

(4) The optimal heat treatment process for high-strength wear-resistant plates is 900℃×1h, water cooling.

Send Inquiry

whatsapp

phone

Email

Inquiry