The advantages of imported wear-resistant steel plates over traditional wear-resistant steel plates
The traditional wear-resistant steel plate generally refers to the impact hardening of high manganese steel under the impact load, the main purpose is to have a strong hardening ability after the impact stress in the process of use, but for the impact load is not large, because the work hardening can not be fully obtained, its hardness and wear resistance can not be improved. Imported wear-resistant steel plate is low-alloy wear-resistant steel plate, such wear-resistant steel plate is widely used in engineering, mining, construction, agriculture, cement production, port, power and metallurgy and other mechanical products with particularly bad working conditions, requiring high strength and high wear resistance. So, what are the advantages of imported wear-resistant steel plates over traditional wear-resistant steel plates?
Advantages of imported wear-resistant steel plate:
1. High wear resistance
At present, the brands of imported wear-resistant steel plates are basically above 400, and the overall wear resistance is much higher than that of traditional wear-resistant steel plates.
2. Good toughness
Like the traditional wear-resistant steel plate, it has good impact toughness.
3. Light weight
Due to the difference in composition, the weight of low-alloy wear-resistant steel is much lower than that of traditional wear-resistant steel.
4. Excellent processing performance
The imported wear-resistant steel plate shows good processing performance in cutting, bending, welding and so on.
5. High cost performance
Direct use of imported wear-resistant steel plates or wear-resistant parts processed with imported wear-resistant steel plates can greatly improve the service life and work efficiency of production equipment, but also greatly improve safety and cost-effective!
According to statistics, in industrially developed countries, the economic loss caused by the wear and tear of machinery and equipment and its parts accounts for about 4% of the gross national economic output value. Therefore, from the perspective of the national economy, the development of high-strength wear-resistant steel for construction machinery is very necessary, in foreign countries very early steel enterprises for high-strength wear-resistant steel research and development, production and application, such as Japan JFE steel, Germany Dillingen Steel, Germany Thyssenklub and Sweden SSAB, etc. Wear-resistant steels with wear life about 4 times longer than traditional wear-resistant steels have been produced.







