Mar 04, 2024 Leave a message

Transverse Distribution Model Of Wear-resisting Plate Tension in Continuous Regression Process And Its Influencing Factors

Transverse distribution model of wear-resisting plate tension in continuous regression process and its influencing factors
In the process of continuous regression production, in addition to product performance, the problems that people are concerned about are mainly concentrated in three aspects, such as hot ladle bending, deviation and the change of the shape of the wear-resistant plate. Among them, when the hot ladle bending defect appears, it will cause wrinkles on the surface of the wear-resistant plate, and cause broken belts. If the deviation exceeds a certain degree, it will also cause the problem of broken belt; The shape of the product after continuous fall is used as the shape of the incoming material in the downstream leveling process, which has a decisive influence on the normal production of the process and the shape distribution of the finished product.

In view of the previous continuous regression process, the lateral stress distribution inside the wear-resistant plate can not be predicted online, so that the deviation, buckling and the evolution of the shape of the wear-resistant plate in the process of continuous regression can not be warned online, and it is easy to cause the wear-resistant plate broken belt defects, fully combined with the equipment and process characteristics of the continuous regression unit.

On the basis of studying the influence models of the lateral temperature difference of the wear plate, the shape of the incoming plate, the roll shape of the furnace, and the errors of the levelness and perpendicularity of the roll on the deformation of the internal elements of the wear plate, a set of transverse distribution model of the internal tension of the wear plate suitable for the continuous regression process is established, and the corresponding calculation strategy is given. The influence of the original roll shape of the furnace roll, the shape of the plate, the transverse temperature difference, the error of the levelness and perpendicularity of the furnace roll, the set tension and other factors on the transverse distribution of the internal tension of the wear-resistant plate in the process of continuous withdrawal was quantitatively analyzed. The corresponding "prediction software of the internal stress distribution and the shape evolution of the wear-resistant plate in the process of continuous withdrawal unit" was compiled and applied to the production practice, and good results were obtained. It has the value of further popularization and application.

China wear resistant steel plate Suppliers

China wear resistant steel plate Manufacturers

China wear resistant steel plate Distributors

 

Send Inquiry

whatsapp

phone

Email

Inquiry