SA516Gr485 Description:
SA516Gr485 is an American standard steel plate for pressure vessels, which is produced according to American ASME standard. SA516Gr485 is delivered under controlled rolling condition, or delivered under normalizing condition as required, or delivered under hot rolling condition. The production thickness of SA516Gr485 is between 8mm-250mm. It is often used in the manufacture of medium and high temperature pressure vessels, such as heat exchangers and pressure vessels.
SA516Gr485 Features:
SA516Gr485 is a steel plate for pressure vessels, its production requirements are relatively strict, requiring SA516Gr485 factory to meet the American standard A578 inspection standard in class C inspection, SA516Gr485 surface is not allowed to have scars, bubbles, sand holes, and cracks, SA516Gr485 has high toughness and yield strength. At the same time, it also has fatigue resistance, high temperature and high pressure resistance, and SA516Gr485 can be more stable after normalizing.
SA516Gr485 Delivery status:
The general delivery state is delivered in hot rolled condition, or the steel plate is delivered in other states as required, such as normalizing, controlled rolling, etc.
SA516Gr485 inspection standard and inspection level:
SA516Gr485 is the American standard steel plate grade, the inspection standard should be in accordance with the American ultrasonic inspection standard for steel plate ultrasonic inspection, the American inspection standard is A578/A578M, the inspection level is represented by A, B, C three English letters.
SA516Gr485 Chemical composition:
C 0.30% or less
Mn: 0.79-1.30%
P 0.035% or less
S: ≤0.035%
Si: 0.13-0.45%
SA516Gr485 Mechanical properties:
Tensile strength -- 485MPa-620MPa
Yield strength -- ≥260MPa
Elongation after fracture -- ≥21%
SA516Gr485 Delivery status:
The general delivery state is delivered in hot rolled condition, or the steel plate is delivered in other states as required, such as normalizing, controlled rolling, etc.
SA516Gr485 inspection standard and inspection level:
SA516Gr485 is the American standard steel plate grade, the inspection standard should be in accordance with the American ultrasonic inspection standard for steel plate ultrasonic inspection, the American inspection standard is A578/A578M, the inspection level is represented by A, B, C three English letters.
SA516Gr485 Chemical composition:
C 0.30% or less
Mn: 0.79-1.30%
P 0.035% or less
S: ≤0.035%
Si: 0.13-0.45%
SA516Gr485 Mechanical properties:
Tensile strength -- 485MPa-620MPa
Yield strength -- ≥260MPa
Elongation after fracture -- ≥21%
