-
Mar 08, 202418CrMnNi2Mo Carburizing Steel: Composition and Core Properties18CrMnNi2Mo is a nickel-molybdenum carburizing alloy steel used for heavily loaded gears and shafts, not a corrosion-resistant grade. This guide covers its composition balance, har -
Mar 08, 20241.6523 / 20NiCrMo2-2 Carburized Round Bar: Grade and Heat TreatmentA purchasing and metallurgical guide to 1.6523 (20NiCrMo2-2) case-hardening round bar under EN 10084. It compares chemistry with 8620, SNCM220 and 20CrNiMo, explains hardenability -
Mar 08, 202421CrMoVA Round Steel: Low-Alloy High-Strength Steel for High-Temperature Service21CrMoVA is a low-alloy, high-strength round steel that combines chromium, molybdenum and aluminium for high-temperature strength and creep resistance. It is supplied as hot-rolled -
Mar 08, 2024Introduction to SNCM420H round steelSNCM420H is a commonly used alloy carburized steel. After carburizing treatment, the surface has very high hardness, wear resistance and contact fatigue strength. At the same time, -
Mar 08, 2024SAE4320H Carburizing Steel: Hardenability and Heat TreatmentSAE4320H is a nickel-chromium-molybdenum case-hardening steel used for gears, bearings and shafts that need a hard wearing case over a tough core. This guide covers its composition -
Mar 08, 202425MnCrNiMoA Low Carbon Ni-Cr-Mo Alloy Structural Steel: Properties and Heat T...25MnCrNiMoA is a low carbon manganese-chromium-nickel-molybdenum alloy structural steel used in the quenched and tempered condition for crankshafts, drive shafts, gear blanks and h -
Mar 08, 202434CrNiMo6 Quenched and Tempered Steel for Shafts and Gears34CrNiMo6, material number 1.6582, is an EN 10083-3 nickel-chromium-molybdenum steel supplied quenched and tempered for shafts, gears and crankshafts. This guide sets out its compo -
Mar 08, 202412Cr1MoVA Cr-Mo-V High-Temperature Strength Steel Plate12Cr1MoVA is a normalized and tempered chromium-molybdenum-vanadium steel plate for pressure equipment operating in the 500-580 C metal temperature band. The article sets out the c -
Mar 08, 202436NiCrMo16 (1.6773) Round Steel: Properties and Heat TreatmentThis guide covers 36NiCrMo16 / 1.6773 nickel-chromium-molybdenum round steel, including the EN and ISO standards that define it, typical chemical composition and the correct austen -
Mar 07, 2024Oxide Inclusion Control in 54SiCr6 Valve Spring Steel: Types, Process Routes ...Oxide inclusions, not average chemistry, decide the fatigue life of 54SiCr6 valve spring steel working at up to 1000 MPa and 2500 to 3000 Hz. This analysis explains how inclusion t -
Mar 07, 2024Analysis and Research on Low-magnification Inclusion Defects in 18CrNiMo7-618CrNiMo7-6 is a low alloy carburized steel, also known as EN 10084 case hardened steel, with the numerical designation 1.6587. This material is usually used to manufacture high-st -
Mar 07, 2024Preliminary Heat Treatment of AMS 6308 Wear-Resistant Plate: Normalizing and ...Preliminary heat treatment decides whether AMS 6308 wear-resistant plate keeps a fine grain size and a dispersed M6C carbide population, or inherits coarse grains and grain-boundar




