As a supplier of EN Alloy Steel Plate, I've witnessed firsthand the critical role that post-weld heat treatment (PWHT) plays in determining the properties of these high-performance materials. In this blog, I'll delve into how PWHT affects the properties of EN Alloy Steel Plate, exploring its impact on mechanical properties, microstructure, and corrosion resistance.
Understanding Post-Weld Heat Treatment
Post-weld heat treatment is a process applied to welded components to relieve residual stresses, improve the material's microstructure, and enhance its overall performance. After welding, the rapid heating and cooling cycles can introduce significant residual stresses in the material, which can lead to cracking, distortion, and reduced mechanical properties. PWHT helps to mitigate these issues by subjecting the welded component to a controlled heating and cooling process.
There are several types of PWHT, including stress relieving, normalizing, annealing, and tempering. Each type of treatment has a specific purpose and is selected based on the material composition, welding process, and the desired properties of the final product.
Impact on Mechanical Properties
One of the primary effects of PWHT on EN Alloy Steel Plate is its impact on mechanical properties such as hardness, strength, and toughness.
Hardness
Welding can cause an increase in hardness in the heat-affected zone (HAZ) of the steel plate due to the rapid cooling and formation of martensite, a hard and brittle phase. PWHT can reduce the hardness in the HAZ by transforming the martensite into softer phases, such as ferrite and pearlite. For example, stress relieving at a relatively low temperature can help to relieve the internal stresses and reduce the hardness without significantly altering the microstructure.
Strength
The strength of EN Alloy Steel Plate can be affected by PWHT in different ways. In some cases, PWHT can increase the strength by promoting the precipitation of fine carbides or other strengthening phases. For instance, tempering at an appropriate temperature can lead to the formation of fine carbide particles, which can strengthen the steel matrix. However, if the PWHT is carried out at too high a temperature or for too long a time, it can result in a decrease in strength due to grain growth and the dissolution of strengthening phases.
Toughness
Toughness is an important property of EN Alloy Steel Plate, especially in applications where the material is subjected to impact or dynamic loading. PWHT can improve the toughness of the steel by reducing the residual stresses and refining the microstructure. For example, normalizing followed by tempering can produce a fine-grained microstructure with improved toughness compared to the as-welded condition.
Influence on Microstructure
PWHT has a significant influence on the microstructure of EN Alloy Steel Plate. The welding process can cause changes in the microstructure, such as the formation of martensite, bainite, and other non-equilibrium phases in the HAZ. PWHT can transform these non-equilibrium phases into more stable phases and refine the grain structure.
Phase Transformation
During PWHT, the non-equilibrium phases formed during welding can undergo phase transformations. For example, martensite can be transformed into ferrite and pearlite or tempered martensite during tempering. These phase transformations can improve the mechanical properties and reduce the susceptibility to cracking.
Grain Refinement
Grain refinement is another important aspect of PWHT. Fine-grained microstructures generally exhibit better mechanical properties, such as higher strength and toughness, compared to coarse-grained microstructures. PWHT can promote grain refinement by controlling the heating and cooling rates and the holding time at elevated temperatures. For example, normalizing involves heating the steel to a temperature above the critical point and then air-cooling, which can result in a fine-grained microstructure.
Effect on Corrosion Resistance
Corrosion resistance is a crucial property for EN Alloy Steel Plate, especially in applications where the material is exposed to corrosive environments. PWHT can affect the corrosion resistance of the steel plate in several ways.
Residual Stress Relief
Residual stresses in the welded component can increase the susceptibility to stress corrosion cracking (SCC). PWHT can relieve these residual stresses, thereby reducing the risk of SCC. By eliminating the internal stresses, the material becomes more resistant to the initiation and propagation of cracks in corrosive environments.


Microstructure Modification
The microstructure of the steel plate can also influence its corrosion resistance. PWHT can modify the microstructure in a way that improves the corrosion resistance. For example, a more homogeneous microstructure with fewer defects and a uniform distribution of alloying elements can provide better protection against corrosion.
Case Studies
Let's take a look at some specific examples of how PWHT affects the properties of different types of EN Alloy Steel Plate.
S690Q Low-alloy (HSLA) Steel
S690Q is a high-strength low-alloy (HSLA) steel commonly used in structural applications. After welding, the as-welded S690Q steel may have high residual stresses and a hard and brittle HAZ. PWHT, such as stress relieving at a temperature of around 600 - 650°C for a few hours, can relieve the residual stresses and reduce the hardness in the HAZ. This can improve the toughness and fatigue resistance of the welded component, making it more suitable for long-term use in structural applications.
41Cr4 Alloy Steel Plate
41Cr4 is a chromium alloy steel that is often used in applications requiring high strength and wear resistance. Welding of 41Cr4 can result in the formation of martensite in the HAZ, which can lead to cracking and reduced ductility. PWHT, such as tempering at a temperature between 550 - 650°C, can transform the martensite into tempered martensite, improving the toughness and ductility of the welded joint.
20MnB5 Alloy Steel Plate
20MnB5 is a boron-containing alloy steel that is used in automotive and engineering applications. After welding, the as-welded 20MnB5 steel may have a heterogeneous microstructure with high hardness in the HAZ. PWHT, such as normalizing followed by tempering, can refine the grain structure and improve the mechanical properties, including strength, toughness, and fatigue resistance.
Conclusion
In conclusion, post-weld heat treatment plays a vital role in determining the properties of EN Alloy Steel Plate. It can significantly improve the mechanical properties, microstructure, and corrosion resistance of the welded component. By carefully selecting the appropriate PWHT process and parameters, we can optimize the performance of the EN Alloy Steel Plate and ensure its suitability for various applications.
If you are interested in purchasing EN Alloy Steel Plate or have any questions about post-weld heat treatment, please feel free to contact us for more information and to discuss your specific requirements. We are committed to providing high-quality products and professional technical support to meet your needs.
References
- ASM Handbook, Volume 4: Heat Treating. ASM International.
- Welding Metallurgy and Weldability of Stainless Steels. John C. Lippold, David J. Kotecki.
- Steel Heat Treatment: Metallurgy and Technologies. George E. Totten, Dragos Pauliuc.






