-
Mar 22, 2024SPA-H Corten Steel ApplicationSPA-H Corten Steel is a highly durable and robust material that is widely used in various applications due to its unique properties. This type of steel is primarily used in outdoor -
Mar 22, 2024Weathering Steel: How Its Protective Patina FormsWeathering steel resists atmospheric corrosion because copper, chromium, nickel and phosphorus turn the oxide layer into a dense, adherent patina under alternating wet and dry expo -
Mar 22, 2024SA516 Gr.60 vs Gr.70: Strength, Chemistry and SelectionSA516 Gr.60 and Gr.70 are adjacent grades of the same carbon-manganese pressure vessel specification, separated mainly by tensile and yield strength, carbon ceiling and carbon equi -
Mar 22, 2024SA516 Gr.70 Steel Plate Thickness Tolerance (ASTM A20)SA516 GR70 is a popular grade of steel used in a wide range of industrial applications. It is known for its strength, durability, and resistance to corrosion. When it comes to the -
Mar 22, 202415CrMoR Steel Plate: Composition, Properties and Welding15CrMoR is a chromium-molybdenum pressure vessel plate defined in GB/T 713, used for welded equipment operating up to roughly 550 °C. This guide covers its designation, chemical an -
Mar 22, 202430CrMo Alloy Steel: Composition, Properties and Heat Treatment30CrMo is a chromium-molybdenum alloy structural steel defined in GB/T 3077 and roughly equivalent to SCM430 and 4130, used mainly in the quenched and tempered condition. This guid -
Mar 22, 2024SA516 Gr.70 Steel Plate: General Technical Requirements GuideSA516 GR70 is a type of steel plate that is commonly used in the construction industry. It is a high-strength material that is able to withstand the rigors of heavy use and wear. I -
Mar 22, 2024SA516 Gr.70 Plate: Properties, Chemistry and Impact TestingSA516 Gr.70 is a killed, fine-grain carbon steel plate for welded pressure vessels, with 70 ksi minimum tensile and 38 ksi minimum yield under ASME SA516/SA516M. This guide covers -
Mar 22, 202417Mn4 Boiler Plate: DIN 17155 Chemistry and Delivery States17Mn4 is a normalised carbon-manganese boiler plate from the DIN 17155 system, now largely superseded by EN 10028-2 P355GH. The article explains how the designation is decoded, whi -
Mar 22, 202410CrMo910 Steel: 2.25Cr-1Mo Composition and High-Temperature Use10CrMo910 is a 2.25% Cr-1% Mo low-alloy steel used for boiler tubes, drums and high-pressure vessels, standardised as 10CrMo9-10 in EN 10216-2 and EN 10028-2. This guide sets out i -
Mar 22, 202413CrMo44 Steel Plate: 1.25Cr-0.5Mo Composition, Properties, Welding13CrMo44 is a 1.25% Cr-0.5% Mo heat-resistant plate for boiler drums, headers and pressure vessels, now standardised in Europe as 13CrMo4-5 under EN 10028-2. This guide covers its -
Mar 22, 2024ASME SA516 Gr.70 Plate: Composition, Toughness, WeldabilitySA516 Gr.70 is the highest strength grade of the ASTM A516 / ASME SA516 carbon steel plate family for welded pressure vessels in moderate and lower temperature service. This guide




