-
Mar 19, 202420MnCr5 Alloy Structural Steel Plate: Composition and Application FieldsA technical review of 20MnCr5 case-hardening steel plate, covering the EN 10084 composition limits, typical carburising and hardening practice, core and case properties, and the ap -
Mar 19, 202420MnCr5 Case-Hardening Steel Plate: Composition and Heat Treatment20MnCr5 (1.7147) is a chromium-manganese case-hardening steel specified in EN 10084, supplied as plate for gear blanks, cam plates and bearing seats. This guide covers its composit -
Mar 19, 2024ABS EH36 Ship Plate: Composition, Impact Toughness and WeldingEH36 is a 355 MPa minimum yield hull structural steel impact tested at minus 40 degrees Celsius, approved under the ABS Rules for Materials and Welding and specified as ASTM A131/A -
Mar 19, 2024ABS EH36 Hull Steel Plate: Chemistry, -40 C Toughness, WeldingABS EH36 is a higher-strength hull structural steel with 355 MPa minimum yield and Charpy testing at minus 40 C, defined by the ABS steel vessel rules and ASTM A131. This guide exp -
Mar 18, 2024Isothermal Oxidation Behaviour of GH1140 Iron-Based Superalloy PlateGH1140 is an iron-based superalloy used for hot components that operate below about 850 degrees C, where oxidation resistance rather than creep strength sets the service life. This -
Mar 18, 2024Cracks in Wear-Resistant Plates During Heating and RollingWear-resistant steel plates, produced from high-hardness alloyed compositions, are prone to surface and internal cracks in the ingot and slab stages during heating and rolling. Thi -
Mar 18, 2024Annealing Temperature Control for Wear-Resistant Steel PlateAnnealing plays two opposite roles in abrasion-resistant steel: recrystallisation softening of cold-rolled sheet, and limited stress relief of quenched and tempered plate where ove -
Mar 18, 2024Silicon Content in Abrasion-Resistant Plate: Structure and PropertiesSilicon is a ferrite stabiliser that narrows the austenitising window of abrasion-resistant plate and can leave soft ferrite bands at mid-thickness. This guide explains how silicon -
Mar 18, 2024SCM440H Steel: Chemical Composition, Hardenability and Heat TreatmentSCM440H is a hardenability-guaranteed chromium-molybdenum steel to JIS G 4053 with 0.38-0.43% C, 0.90-1.20% Cr and 0.15-0.30% Mo. This guide compares it with 42CrMo and 4140, expla -
Mar 18, 2024SCM445H Steel: Properties, Heat Treatment and UsesSCM445H is a chromium-molybdenum alloy steel defined in JIS G4052, the Japanese standard for chromium molybdenum steels with guaranteed hardenability (H band). The designation mean -
Mar 18, 2024SAE 1050 Carbon Steel Plate: Composition and Heat TreatmentSAE 1050 is a 0.50% carbon plain steel (UNS G10500) used for parts that are machined soft and then hardened and tempered. This guide covers its composition window against C50E and -
Mar 15, 2024Intermediate Cooling in Controlled Rolling of Wear-Resistant PlateWear-resistant plate depends on a thermo-mechanical route in which the transfer slab is cooled between roughing and finishing instead of waiting in air. This article explains the r




